Hardware Parts
Showing 1–15 of 50 results
- Hardware Parts, Testing Tools
Mastech Digital Multimeter MAS830L
Features of Mastech MAS830L Digital Multimeter
- General
- Display Type
LCD
- Type
Digital
- Material
Plastic
- Number of Counts
2000
- Primary Functions
AC/DC Volt, Resistance, Transistor, Diod, DC Current
- Audible Continuity Test
Yes
- Backlight
Yes
- Data Freeze
Yes
- Power Features
- Number of Batteries
1
- Battery Type
9 V
- Functions
- Resistance
200O/2KO/20KO/200KO/2MO
- DC Voltage
600 V
- AC Voltage
600 V
- Other Functions
Transistor Check,, Diod
- Dimensions
- Weight
381 g
SKU: DMM_830L - Hardware Parts, Sensors
3Kg Load cell – Electronic Weighing Scale Sensor
A load cell is a transducer that is used to create an electrical signal whose magnitude is directly proportional to the force being measured. The various types of load cells include hydraulic load cells, pneumatic load cells and strain gauge load cells.
This is a standard load cell for measuring weight upto 3 Kg. The output of the load cell is in mili-volts and cannot be directly measured by a micro-controller. So an ADC with high resolution or an instrumentation amplifier is required to make the output of the load cell readable to a micro-controller.
SKU: Sensor_LC3kg - Hardware Parts, Power supply Modules, SMPS
12V 5 Amp 60W DC Power Supply/SMPS for LED Strip and CCTV
-16%Hardware Parts, Power supply Modules, SMPS12V 5 Amp 60W DC Power Supply/SMPS for LED Strip and CCTV
- Great Switching Power Supply for Home Appliances
- Design with Built-in EMI Filter, Improve Signal Precision.
- Approvals: 3C/FC/ CE
- EMC Standards: According with GB9254, EN55022 class A, EN61347-2-13:2008 Standards
- Certifications: CE andamp; RoHs
- Meet CEC Energy Efficiency Level IV.
- Power LED Monitor (LED Glow when in Use)
- Category – Switch Mode Power Adaptor (SMPS)
- MTBF 50,000 hours
- IN-DOOR USE ONLY!
- This Power Supply Unit andquot;DOES NOTandquot; comes with installation instruction, wiring cable, on/off switch, or screws. Professional installation of qualified electrician is highly recommended.
- PLEASE NOTE THAT DESIGN AND COLOR MAY CHANGE FROM THE PICTURE SHOWN ABOVE
12Volt 5Amp, 60W SMPS/ Power Supply :
- Input Voltage: AC 90 – 264V 50 / 60Hz
- Output Voltage: 12V DC, 5A, and 60Watt
- Output Voltage: Adjustment Eange: andplusmn;20percent
- Output Voltage Type – DC ;Current
- Shell Material: Metal Case / Aluminum Base
- Color: Sliver
- Weight: 380g Approx
- Dimension: 158 x 98 x 42mm Approx
SKU: Power_Supply_12_5 - Hardware Parts, Testing Tools
Digital Voltmeter Ammeter DC 0-100V 10A Dual LED Monitor Panel, Red and Blue
-34%Hardware Parts, Testing ToolsDigital Voltmeter Ammeter DC 0-100V 10A Dual LED Monitor Panel, Red and Blue
- Xcluma digital voltmeter ammeter dc 0-100v 10a dual led red blue monitor panel
- 100 percent brand new size: 48mm x 29mm x 21mm display color: Red and blue led (dual display) display: 028″ led digital
- Operating voltage: Dc 45 ~ 30v measure voltage: Dc 0 ~ 100v minimum resolution (v): 01v operating current: <20ma
- Measure current: 10a (direct measurement, built-in shunt) operating temperature: -10 to 65Ã’°c operating humidity: 10 to 80 percent (non-condensing) mounting cutout: 455mm x 265mm
- Measurement Accuracy: 1% (± 1 digit)
SKU: Digital_voltmeter_DC - Cooling Fan, Hardware Parts, Thermistors
TEC1-12706 Thermoelectric Cooler Module
Thermoelectric coolers (TEC or Peltier) create a temperature differential on each side. One side gets hot and the other side gets cool. Therefore, they can be used to either warm something up or cool something down, depending on which side is used. You can also use temperature differential to generate electricity.
A thermoelectric cooling (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying DC power source to a TEC, heat will be transferred from one side of the module to the other. It creates a cold and hot side. They are widely used in industrial areas, for example, computer CPU, CCDs, portable refrigerators, medical instruments, and so on.
When exposed to different temperatures on both sides it will also work as a generator and generate electricity depending on the temperature difference.
Specification:-
- Model number: TEC1-12706
- Voltage : 12V
- Vmax (V) : 15.4V
- Imax (A) : 6A
- QMax (W) : 92W
- Internal resistance: 1.98 Ohm +/- 10%
- Dimensions : 40mm x 40mm x 3.6mm
- Type: Cooling Cells
- Usage: Refrigerator/Warmer/Generator
* Product Images are shown for illustrative purposes only and may differ from actual product.
SKU: Thermoelectric_12706 - Hardware Parts, Power supply Modules, SMPS
3.7V To 5V 2A Boost Module DIY Power Bank Kit||Powerbank kit
-17%Hardware Parts, Power supply Modules, SMPS3.7V To 5V 2A Boost Module DIY Power Bank Kit||Powerbank kit
Features:
1. 4 level LED lights show electricity, non-working state smart automatic shutdown;2. Built-in lithium battery protection IC, overcurrent, overvoltage, undervoltage protection;3. Dual USB output;4. Motherboard size: 69 x 32 x 8mm(L x W x H)SKU: 3.7V To 5V 2A Boost Module DIY Power Bank Kit||Powerbank kit - Hardware Parts
6283 KIT single IC Audio Board with Bass Treble 30 W Stereo Amplifier Kit
Quality sound mini stereo board with all feature
Built in Bass Treble Voume connection, Potentiometer not included
Passive design, no ground loop at the end of the problem! And independent design with shielded ground, and audio signal ground completely separated, the clutter will not chaos string!
Power supply 12 V 2 amp, Input / Output sound : 2 channel stereo
This Audio board also include bridge rectifier with capacitor so can be directly connect with Transformer.SKU: KIT6283 - Hardware Parts, other ics, Power supply Modules, SMPS
TP4056 – 1A – Li-Ion Lithium Battery charging Module – Micro USB
-27%Hardware Parts, other ics, Power supply Modules, SMPSTP4056 – 1A – Li-Ion Lithium Battery charging Module – Micro USB
TP4056 – 1A – Lithium Battery charging Module – Micro USB
* Product Images are shown for illustrative purposes only and may differ from actual product.
SKU: TP4056 - 1A - Li-Ion Lithium Battery charging Module - Micro USB - Hardware Parts, Speakers
Speaker 2-Inch 4/8 Ohm 10Watt Intex -1Pc
- This TC family 2 inch 4 ohm full-range driver,with ferrite magnet, paper cone and rubber surround, and steel basket, is designed to be a cost-effective high performance full range driver
- Driver Type: Full Range, Size: 2 in, Motor: Ferrite, Frame: Steel Basket, Impedance: 4 Ω, Diaphragm: Paper
- Driver Size-2 in, DC Resistance-3.54 Ω, Resonant Frequency-175.19 Hz, Half Space Sensitivity@ 2.83V-84.5 dB, Sensitivity @ 1W/1m-81.6 dB, Rated Noise Power (IEC 268-5 18.1)-15 W, Test Spectrum Bandwidth-150Hz – 20kHz 12 dB/Oct, Effective Piston Area-15.2 cm2, Moving Mass-1.2 g, Motor Force Factor-1.92 Tm
- Voice Coil Inner Diameter-19.32 mm, Gap Height-3 mm, Maximum Linear Excursion-1 mm, Minimum Impedance-4.09 Ω, Voice Coil Inductance-0.02 mH, Mechanical Q Factor-4.09, Electrical Q Factor-1.29, Total Q Factor-0.98, Ratio-178.58 fs/Qts, Suspension Compliance-677 μm/N
SKU: Speaker 2-Inch 4/8 Ohm 10Watt Intex -1Pc - Accessories, Accessories, Hardware Parts
Bracket for Ultrasonic Sensor Module – HC-SR04
Mounting Bracket for Ultrasonic Sensor Module – HC-SR04
Features:
- Thickness :2.8mm – 3.1mm
- Inner diameter: 16mm
- Diameter of mounting hole: 3.8mm
- Material: acrylic
- Usage: fixed ultrasonic sensor modules
* Product Images are shown for illustrative purposes only and may differ from actual product.
SKU: Bracket_HCSR04