404!
Nothing was found at this location. Try searching, or check out the links below.
On Sale Now
- Nano Tempered Glass
Xolo Q800 Nano Tempered Glass || Xolo Q800 Tempered Glass
Nano Protection Screen Guard
Designed For - Xolo Q800 Nano Tempered Glass
Type - Nano Protection Screen Guard & 9H Hardness
Sales Package - Tempered Glass, Dry-wipe, Wet Wipe
Applied on - Front Part of Mobile Phone
SKU: Xolo Q800 Nano Tempered Glass || Xolo Q800 Tempered Glass - Potentiometer, Resistance
100K Dual Potentiometer -1 pc
This Panel Mount 100K Dual Log Potentiometer is a dual-ganged potentiometer that will satisfy all your stereo-signal needs. Instead of just one potentiometer, you actually get two separate pots, ‘ganged’ together. Turning the grippy shaft twists both standard logarithmic-taper 10Kohm potentiometers. It’s smooth and easy to turn, but not so loose that it will shift on its own.
Potentiometers, or “pots” to electronics enthusiasts, are differentiated by how quickly their resistance changes. In linear pots, the amount of resistance changes in a direct pattern. If you turn or slide it halfway, its resistance will be halfway between its minimum and maximum settings. That’s ideal for controlling lights or a fan, but not necessarily for audio controls. Volume controls have to cater to the human ear, which isn’t linear. Instead, logarithmic pots like this one increase their resistance on a curve. At the halfway point volume will still be moderate, but it will increase sharply as you keep turning up the volume. This corresponds to how the human ear hears. Using a log pot therefore gives the effect that a setting of full volume on the control sounds twice as loud as a setting of half volume. A linear pot used as a volume control would give large apparent changes in loudness at low volume settings, with little apparent change over the rest of the control´s range.
Unlike some of our other potentiometers, this one is not breadboard-friendly. The pins are about 0.2″ apart so it will fit into a breadboard, but the two rows are close together so you’d short the two halves. Thus, we suggest soldering wires to the pins as necessary, using these in a perf-board that doesn’t have the rows connected, or designing a custom PCB.
Once you’re done prototyping, you can drill a hole into your project box and mount the potentiometer using the included washer and hex nut.
SKU: POT_100k_6 - 74XX ICs
7483 4-Bit Binary full adder – 2Pcs
The 7483/74LS83 is a high-speed 4-Bit binary Full Adder with internal carry look-ahead. It accepts two 4-bit binary words (A1–A4, B1–B4) and a Carry Input (C0). It generates the binary Sum outputs ∑1–∑4) and the Carry Output (C4) from the most significant bit. The LS83A operates with either active HIGH or active LOW operands (positive or negative logic).
SKU: 7483 4-Bit Binary full adder - 2Pcs
Product Categories
Popular Products
- Nano Tempered Glass
Xolo Q800 Nano Tempered Glass || Xolo Q800 Tempered Glass
Nano Protection Screen Guard
Designed For - Xolo Q800 Nano Tempered Glass
Type - Nano Protection Screen Guard & 9H Hardness
Sales Package - Tempered Glass, Dry-wipe, Wet Wipe
Applied on - Front Part of Mobile Phone
SKU: Xolo Q800 Nano Tempered Glass || Xolo Q800 Tempered Glass - Potentiometer, Resistance
100K Dual Potentiometer -1 pc
This Panel Mount 100K Dual Log Potentiometer is a dual-ganged potentiometer that will satisfy all your stereo-signal needs. Instead of just one potentiometer, you actually get two separate pots, ‘ganged’ together. Turning the grippy shaft twists both standard logarithmic-taper 10Kohm potentiometers. It’s smooth and easy to turn, but not so loose that it will shift on its own.
Potentiometers, or “pots” to electronics enthusiasts, are differentiated by how quickly their resistance changes. In linear pots, the amount of resistance changes in a direct pattern. If you turn or slide it halfway, its resistance will be halfway between its minimum and maximum settings. That’s ideal for controlling lights or a fan, but not necessarily for audio controls. Volume controls have to cater to the human ear, which isn’t linear. Instead, logarithmic pots like this one increase their resistance on a curve. At the halfway point volume will still be moderate, but it will increase sharply as you keep turning up the volume. This corresponds to how the human ear hears. Using a log pot therefore gives the effect that a setting of full volume on the control sounds twice as loud as a setting of half volume. A linear pot used as a volume control would give large apparent changes in loudness at low volume settings, with little apparent change over the rest of the control´s range.
Unlike some of our other potentiometers, this one is not breadboard-friendly. The pins are about 0.2″ apart so it will fit into a breadboard, but the two rows are close together so you’d short the two halves. Thus, we suggest soldering wires to the pins as necessary, using these in a perf-board that doesn’t have the rows connected, or designing a custom PCB.
Once you’re done prototyping, you can drill a hole into your project box and mount the potentiometer using the included washer and hex nut.
SKU: POT_100k_6 - 74XX ICs
7483 4-Bit Binary full adder – 2Pcs
The 7483/74LS83 is a high-speed 4-Bit binary Full Adder with internal carry look-ahead. It accepts two 4-bit binary words (A1–A4, B1–B4) and a Carry Input (C0). It generates the binary Sum outputs ∑1–∑4) and the Carry Output (C4) from the most significant bit. The LS83A operates with either active HIGH or active LOW operands (positive or negative logic).
SKU: 7483 4-Bit Binary full adder - 2Pcs - Rings & Holders
POP socket PHONE Expanding Stand and Grip Pop Holder for Smartphones and Tablets Mobile Holder
-72%Rings & HoldersPOP socket PHONE Expanding Stand and Grip Pop Holder for Smartphones and Tablets Mobile Holder
Brand - BNOSLLP
Model Number - UNIQUE POP UP PHONE Expanding Stand and Grip Pop Holder for Smartphones and Tablets
Material - Plastic
Compatible With - mobile, Tablet, laptop
Type - Pop
Mount Type - Sticky Pad
Foldable - Yes
Color - Multicolor
SKU: holder_pop_wall