Arduino
Showing 1–15 of 75 results
- Boards
Arduino Due Microcontroller Board
The Due is Arduino’s first ARM-based Arduino development board. This board is based on a powerful 32bit CortexM3 ARM microcontroller made programmable through the familiar Arduino IDE. It increases the computing power available to Arduino users keeping the language as compatible as possible so that many programs will be migrated in a matter of minutes! The Arduino Due has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), an 84 MHz clock, a USB-OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button. There are also some cool features like DACs, Audio, DMA , an experimental multi tasking library and more. Note: Unlike other Arduino boards, the Arduino Due board runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Providing higher voltages, like 5V to an I/O pin could damage the board. Features: Micro-controller: AT91SAM3X8E Operating Voltage: 3.3V Recommended Input Voltage: 7-12V Min-Max Input Voltage: 6-20V Digital I/O Pins: 54 (of which 12 provide PWM output) Analog Input Pins: 12 Analog Outputs Pins: 2 Total DC Output Current on all I/O lines: 130 mA DC Current for 3.3V Pin: 800 mA DC Current for 5V Pin: 800 mA Flash Memory: 512 KB all available for the user applications SRAM: 96 KB (two banks: 64KB and 32KB) Clock Speed: 84 MHz
SKU: Arduino_due - Arduino, Boards, PROGRAMMABLE BOARDS
Arduino Mega 2560 R3 Board with USB Cable
Specifications:-
- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 256 KB of which 8 KB used by bootloader
- SRAM: 8 KB
- EEPROM: 4 KB
- Clock Speed: 16 MHz
- USB Host Chip: MAX3421E
- Length:101.98mm/4.01in
- Width:53.63mm/2.11in
- Height:15.29mm/0.60in
SKU: Arduino Mega 2560 R3 Board with USB Cable - Accessories, Accessories, Boards, Modules
Sim900A Gsm Modem Module with Sma Antenna
- Compatible with arduino, raspberry pi, arm, avr, pic, 8051, etc
- Best suited for gsm based microcontroller projects (better than sim300 and other gsm modems)
- Option for connecting mic and speaker directly to gsm modem for calls (line in also available)
- Supports communication through rs232 with db9 connector, ttl pins and i2c pins^call sms gprs facility – mic input, line input and speaker output pins^
SKU: Sim900_A - Arduino, Boards, PROGRAMMABLE BOARDS
Arduino Leonardo R3 Board
- Microcontroller: ATmega32u4
- Operating voltage: 5V
- Input voltage(recommended): 7V – 12V Input voltage(limits): 6V – 20V
- Digital I / O pins: 20 PWM channels: 7
- PWM channels: 7 Analog input channels: 12 DC current per I / O pin: 40mA
SKU: Arduino Leonardo R3 Board - Arduino, Boards, PROGRAMMABLE BOARDS
Arduino UNO R3 Development Board
Features:-
- Microcontroller: ATmega328P.
- Operating Voltage: 5V.
- Input Voltage: 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6.
- DC Current: 40mA.
- Flash Memory: 32 KB.
- SRAM: 2 KB.
- EEPROM: 1 KB.
- Clock Speed: 16 MHz.
Applications:-
- DIY project prototyping.
- Developing varied varieties of projects that require a code based control.
- Automation System development.
- Learning AVR programming.
- Entry level circuit designing.
SKU: Arduino UNO R3 Development Board - Accessories, Accessories, Other Module, Robot Parts
NEO-6M U-BLOX NEO-6M GPS Positioning Module to Serial TTL
-36%Accessories, Accessories, Other Module, Robot PartsNEO-6M U-BLOX NEO-6M GPS Positioning Module to Serial TTL
- Interface: UART interface, with logical level converter, 3.3V-5V interface compatible
- SunRobotics ublox neo-6m gps module (3.3V-5V interface with eeprom and flash)
- Board size: 23mm*40mm
- Antenna: High gain active anttenna and good performance. 25mm*25mm
SKU: NEO-6M U-BLOX NEO-6M GPS Positioning Module to Serial TTL - Accessories, Accessories, Other Module, Robot Parts
SIM800L GPRS GSM Module Micro SIM Core Board QUAD-BAND Port TTL For Arduino
-50%Accessories, Accessories, Other Module, Robot PartsSIM800L GPRS GSM Module Micro SIM Core Board QUAD-BAND Port TTL For Arduino
- Ttl Serial Interface Compatible
- Microcontrollers,Compatible With Arduino
- This Sim800L Module Has A Set Of Ttl Level Serial Interface, A Set Of Power Supply Interface
- Imported From HongKong
- Warranty not applicable for this product
SKU: SIM800L GPRS GSM Module Micro SIM Core Board QUAD-BAND Port TTL For Arduino - Accessories, Development Board, Modules, Other Module, PROGRAMMABLE BOARDS, Shields
AESW5100 Ethernet Shield W5100 for Arduino UNO Mega 2560 1280 328
-29%Accessories, Development Board, Modules, Other Module, PROGRAMMABLE BOARDS, ShieldsAESW5100 Ethernet Shield W5100 for Arduino UNO Mega 2560 1280 328
- Based on w5100 ethernet controller
- Supports all major arduino board
- Supported directly by arduino libraries
- Micro sd card can be used with this shield
SKU: AESW5100 Ethernet Shield W5100 for Arduino UNO Mega 2560 1280 328 - Arduino, Boards, PROGRAMMABLE BOARDS
Lilypad Arduino 328 Main Board
The LilyPad Arduino Main Board is based on the ATmega328V. It features all digital and analog pins you would find on the Arduino UNO R3 (Digital 0-13 & Analog 0-5). to save space and make the board lighter they have removed the USB-port and USB to TTL chip, there for the Lily pad requires an FTDI to be programmed.
SKU: Lilypad Arduino 328 Main Board - Arduino, Boards, PROGRAMMABLE BOARDS
Arduino UNO R3 SMD Atmega328P Board – Clone Compatible Model
-11%Arduino, Boards, PROGRAMMABLE BOARDSArduino UNO R3 SMD Atmega328P Board – Clone Compatible Model
Specifications:-
Microcontroller : ATmega328 SMD.
Operating Voltage : 5V.
Supply Voltage recommended : 7-12V DC.
Digital I/O Pins : 14 (of which 6 provide PWM output).
Analog Input Pins : 6.
DC Current per I/O Pin : 40 mA.
DC Current for 3.3V Pin : 50 mA.
Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader.
SRAM : 2 KB (ATmega328).
EEPROM : 1 KB (ATmega328).
Clock Speed : 16 MHz.
SKU: Arduino UNO R3 SMD Atmega328P Board - Clone Compatible Model - Arduino, Boards, PROGRAMMABLE BOARDS
Arduino Pro Mini – ATMEGA 328P – AU 5V -16Mhz
- New mini atmega328 replace aTmega128 for Arduino-compatible nano module
- Package Included: 1 x Arduino pro min atmega328p board, 3 x gilded pin
- Analog Pins: 8 Digital I or Os: 14
- Supports auto-reset
SKU: Arduino Pro Mini - ATMEGA 328P - AU 5V -16Mhz - Accessories, Accessories, Bluetooth, Sensors
Wireless Bluetooth HC-06 Slave Mode Module w/ Backboard
-3%Accessories, Accessories, Bluetooth, SensorsWireless Bluetooth HC-06 Slave Mode Module w/ Backboard
Features:
- CSR Bluetooth Chip Solution
- Bluetooth v2.0+EDR Compliant
- UART interface and with baud rate setup function
- Built-in antenna.
- Coverage up to 30ft.
- Incredible small size with 3.3V input, and RoHS Compliant
- Working current: While pairing 30mA, paired 8mA
- Frequency: 2.4GHz ISM band
- Baud rate is 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 user manually set up.
- Default Baud Rate: 9600,8,1,n
- Support for 8Mbit External Flash Onboard
- Support for 802.11 Co-Existence Product Description
- Storage Temperature: -40 to 85 degrees Celsius
- Size : 28 mm x 15 mm x 2.35 mm
SKU: Wireless Bluetooth HC-06 Slave Mode Module w/ Backboard