Raspberry
Showing 1–15 of 67 results
- Accessories, Accessories, Sensors
IR Sensor Module
Features of IR Sensor Module:-
- When the module detects obstacles in front of the signal, the circuit board green indicator light level, while the OUT port continuous output low-level signals, the module detects a distance of 2 ~ 10cm, detection angle 35 °, the detection distance can be potential adjustment with adjustment potentiometer clockwise, the increase in detection distance; counterclockwise adjustment potentiometer, the detection distance decreased.
- the sensor active infrared reflection detection, target reflectivity and shape of the detection distance of the key. The black minimum detection range, white maximum; small area object distance is small, a large area from the large.
- The sensor module output port OUT can be directly connected with the microcontroller IO port can also be driven directly to a 5V relay; Connection: VCC-VCC; GND-GND; OUT-IO.
- The comparator using LM393, stable.
- 3-5V DC power supply module can be used. When the power is turned on, the red power LED is lit.
- With the screw holes of 3mm, easy to install.
- Board size: 3.1CM * 1.5CM.
- Each module in the delivery has threshold comparator voltage adjustable via potentiometer, special circumstances, please do not adjust the potentiometer.
SKU: IR Sensor Module - Accessories, Boards
Raspberry Pi Camera Board
- The board itself is tiny, at around 25mm x 20mm x 9mm and weighing in at just over 3g, making it perfect for mobile or other applications
- The sensor has a native resolution of 5 megapixel and has a fixed focus lens onboard
- The camera is capable of 2592 x 1944 pixel static images and also supports 1080p30, 720p60 and 640x480p60/90 video
SKU: Raspberry Pi Camera Board - Boards
Raspberry Pi 3 – Model B+ – 1.4Ghz 64Ghz Processor with 1 GB Ram (Latest & Original)
Specifications:-
- Processor: Broadcom BCM2837 Processor Quad core A53 (ARM v8) 64-bit SoC
- Memory: 1GB LPDDR2 SDRAM
- Bluetooth: Cypress BLE chip 2.4Ghz/5.0GHz IEEE 802.11ac
- Ethernet: Gigabit Ethernet over USB 2.0 (300Mbps max)
- USB: Four USB 2.0 ports
- Connection: GPIO Header 40-pin
- HDMI: 1 x full size
- Video: MIPI DSI display port, MIPI CSI camera port & 4 Pole stereo output and composite video port
- Multimedia: H.264, MPEG-4 decode (1080p30). H.264 encode (1080p30). OpenGL ES 1.1, 2.0 graphics.
- Storage: microSD card slot for loading operating system and data storage
- Power: USB connector for 5.1V / 2.5A dc
- POE enabled
SKU: Raspberry Pi 3 - Model B+ - 1.4Ghz 64Ghz Processor with 1 GB Ram (Latest & Original) - Accessories, Accessories, Sensors
Humidity & Temperature Basic Sensor Module DHT11
Features:
- Sensor is composed of a resistive humidity sensing component and an NTC temperature testing component and connects with 8-byte MCU
- MCU outputs a digital code
- Fast response and great anti-interference capability
- Durable and long lasting sensor
- Low power consumption
- Based on the DHT11 sensor architecture
Specifications:
- Operating Voltage: DC 3.3 – 5V
- Current: Max. 2.5mA
- Humidity Measurement range: 20% ~95% | ±5%RH
- Temperature Measurement range: 0℃~60℃ | ±2 ℃
- Connections; GND, Vcc, and Signal
- Depth 12mm, Height 7mm, Width 36mm
- Weight 5.0g
SKU: Humidity & Temperature Basic Sensor Module DHT11 - Accessories, Accessories, Sensors
PIR Motion Sensor Module HC-SR501 w/ Adjustable Delay Time & Output Signal – 1Pc
-24%Accessories, Accessories, SensorsPIR Motion Sensor Module HC-SR501 w/ Adjustable Delay Time & Output Signal – 1Pc
Key Features
- Detection range up to 20 feet
- Single bit output
- Jumper selection single or continuous trigger output mode
- 3-pin SIP header ready for breadboard or through-hole project
Specifications
- Operating voltage:Â DC 5Â – 12V
- Static power consumption:Â 65 mA
- Output Signal:Â 3V TTL
- Detection Distance:Â Up to 6 meter (Adjustable)
- Sensing Range: Less than 120° degree angle, 6 meters
- Delay Time:Â 5 – 200s (Adjustable)
- Adjustable Trigger:  L: non repeatable trigger  –  H: repeatable trigger
- Operating Temperature: -15 to +70°C
- Dimensions:Â 32Â x 24mm, screw hole distance 28mm
SKU: PIR Motion Sensor Module HC-SR501 w/ Adjustable Delay Time & Output Signal - 1Pc - Accessories, Accessories, Sensors
Ultrasonic Distance Sensor Module – HC-SR04
Features:
- Sensor Type: Ultrasonic
- Output: Digital Sensor
- Voltage: 5VDC
- Detection distance: 2cm-400cm (0.02M – 4.0M)
- Static current: < 2mA
- Level output: high-5V
- High precision: up to 0.3cm
SKU: Ultrasonic Distance Sensor Module - HC-SR04 - Accessories, Accessories, Other Module, Robot Parts
SIM800L GPRS GSM Module Micro SIM Core Board QUAD-BAND Port TTL For Arduino
-50%Accessories, Accessories, Other Module, Robot PartsSIM800L GPRS GSM Module Micro SIM Core Board QUAD-BAND Port TTL For Arduino
- Ttl Serial Interface Compatible
- Microcontrollers,Compatible With Arduino
- This Sim800L Module Has A Set Of Ttl Level Serial Interface, A Set Of Power Supply Interface
- Imported From HongKong
- Warranty not applicable for this product
SKU: SIM800L GPRS GSM Module Micro SIM Core Board QUAD-BAND Port TTL For Arduino - Accessories, Kits
Arduino Starter Kit
Kit Includes :
- Arduino Uno R3 – 1 Pc
- Arduino Uno Cable – 1Pc
- Transistor BC547Â – 3Pc
- IR sensor Module – 1Pc
- Potentiometer 22K or 100k or 47 K 1 PC
- HW 9 Watt Battery – 1P
- LDR -1Pc
- 5mm LED – 5Pc
- Male Male,Female Female,Male Female Connecting Wires : 5 Pc Each
SKU: Arduino_kit - Accessories, Accessories, Boards, Modules
Sim900A Gsm Modem Module with Sma Antenna
- Compatible with arduino, raspberry pi, arm, avr, pic, 8051, etc
- Best suited for gsm based microcontroller projects (better than sim300 and other gsm modems)
- Option for connecting mic and speaker directly to gsm modem for calls (line in also available)
- Supports communication through rs232 with db9 connector, ttl pins and i2c pins^call sms gprs facility – mic input, line input and speaker output pins^
SKU: Sim900_A - Accessories, Accessories, Hardware Parts
Bracket for Ultrasonic Sensor Module – HC-SR04
Mounting Bracket for Ultrasonic Sensor Module – HC-SR04
Features:
- Thickness :2.8mm – 3.1mm
- Inner diameter: 16mm
- Diameter of mounting hole: 3.8mm
- Material: acrylic
- Usage: fixed ultrasonic sensor modules
* Product Images are shown for illustrative purposes only and may differ from actual product.
SKU: Bracket_HCSR04 - Accessories, Accessories, Sensors
NRF24L01 + 2.4GHZ Wireless Transceiver module for Arduino
1 low working voltage: 1.9 ~ 3.6V low voltage operation 2 high speed: 2Mbps, due to the transmission time is very short, greatly reducing the collision phenomenon in the wireless transmission (air transmission rate software set 1Mbps or 2Mbps) 3 multi frequency: 125 frequency points, meet the multipoint communication and frequency hopping communication needs 4 tiny: built-in 2.4GHz antenna, small volume, 15x29mm (including antenna) 5 low power: when working in answer mode communication, air transport and starting time of fast, greatly reducing current consumption. 6 low cost: the NRF24L01 integrates all the relevant RF agreements and high-speed signal processing, such as: automatic retransmission of lost packets and automatically generate a response signal, SPI interface, NRF24L01 can use the hardware SPI port connection or by SCM I/O port simulation, internal FIFO and all kinds of high and low speed microprocessor interface, easy to use low cost microcontroller.
SKU: sensor_nrf24l01