No products in the cart.
-34%
Accessories, Patch Cord Compare
CAT 5 Ethernet – LAN Cable – High Speed – 5m / 1Pc
High Speed CAT 5 Ethernet – LAN Cable can be used with Raspberry Pi or any Laptop or PC having an RJ45 Jack
Copper ,LD Wire ,
Speed : 10/100 Mbps
Length – 5m
Availability:
25 in stock
₹99.00 ₹149.00
25 in stock
High Speed CAT 5 Ethernet – LAN Cable can be used with Raspberry Pi or any Laptop or PC having an RJ45 Jack
Copper ,LD Wire ,
Speed : 10/100 Mbps
Length – 5m
* Product Images are shown for illustrative purposes only and may differ from actual product.
Add a review
You must be logged in to post a review Log In
Related products
- Accessories, Modules, Shields, Accessories, Motor Driver
L293D IC BASED MOTOR DRIVER MODULE compatible with Arduino
-30%
Accessories, Modules, Shields, Accessories, Motor DriverL293D IC BASED MOTOR DRIVER MODULE compatible with Arduino
- CAN CONTROL DC GEARED MOTOR
- CAN BE EASILY INTERFACED WITH MICRO-CONTROLLER USING HEADER PINS
- COMPATIBLE WITH ARDUINO, RASPBERRY PI, ARM, AVR, PIC, 8051, etc – Can provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V.
- With Terminal Blocks for connecting motors & power supply and Berg Sticks for control signals from microcontroller
- Can control 2 DC Motors, their direction using control lines and their speed using PWM.
SKU: L293D IC BASED MOTOR DRIVER MODULE compatible with Arduino - PROGRAMMABLE BOARDS, Arduino, Boards
Arduino Mega 2560 R3 Board with USB Cable
Specifications:-
- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 256 KB of which 8 KB used by bootloader
- SRAM: 8 KB
- EEPROM: 4 KB
- Clock Speed: 16 MHz
- USB Host Chip: MAX3421E
- Length:101.98mm/4.01in
- Width:53.63mm/2.11in
- Height:15.29mm/0.60in
SKU: Arduino Mega 2560 R3 Board with USB Cable - PROGRAMMABLE BOARDS, Arduino, Boards
Arduino NANO V3.0 Development Board – Clone Compatible Model
-20%
PROGRAMMABLE BOARDS, Arduino, BoardsArduino NANO V3.0 Development Board – Clone Compatible Model
Specifications:-
- Microcontroller Atmel ATmega328 SMD Package
- Operating Voltage (logic level) 5 V
- Input Voltage (recommended) 7-12 V
- Input Voltage (limits) 6-20 V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins 8
- DC Current per I/O Pin 40 mA
- Flash Memory 32 KB (of which 2KB used by bootloader)
- SRAM 2 KB
- EEPROM 1 KB
- Clock Speed 16 MHz
- Dimensions 0.70” x 1.70
SKU: Arduino NANO V3.0 Development Board - Clone Compatible Model - PROGRAMMABLE BOARDS, Arduino, Boards
Arduino UNO R3 SMD Atmega328P Board – Clone Compatible Model
-11%
PROGRAMMABLE BOARDS, Arduino, BoardsArduino UNO R3 SMD Atmega328P Board – Clone Compatible Model
Specifications:-
Microcontroller : ATmega328 SMD.
Operating Voltage : 5V.
Supply Voltage recommended : 7-12V DC.
Digital I/O Pins : 14 (of which 6 provide PWM output).
Analog Input Pins : 6.
DC Current per I/O Pin : 40 mA.
DC Current for 3.3V Pin : 50 mA.
Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader.
SRAM : 2 KB (ATmega328).
EEPROM : 1 KB (ATmega328).
Clock Speed : 16 MHz.
SKU: Arduino UNO R3 SMD Atmega328P Board - Clone Compatible Model
Reviews
There are no reviews yet