No products in the cart.
9V battery- Hi Watt Battery(HW) With Teflon Battery Clip Connector – 1Pcs
- 9V Hi-Watt Battery With Battery Clip
- This battery is a high capacity & low cost solution for many electronic devices.
- It is used with its specific battery snap, connector or clip.
- The battery clip can be used to power LEDs or other devices with a 9V battery.
₹29.00₹49.0012V 5 Amp 60W DC Power Supply/SMPS for LED Strip and CCTV
- Great Switching Power Supply for Home Appliances
- Design with Built-in EMI Filter, Improve Signal Precision.
- Approvals: 3C/FC/ CE
- EMC Standards: According with GB9254, EN55022 class A, EN61347-2-13:2008 Standards
- Certifications: CE andamp; RoHs
- Meet CEC Energy Efficiency Level IV.
- Power LED Monitor (LED Glow when in Use)
- Category – Switch Mode Power Adaptor (SMPS)
- MTBF 50,000 hours
- IN-DOOR USE ONLY!
- This Power Supply Unit andquot;DOES NOTandquot; comes with installation instruction, wiring cable, on/off switch, or screws. Professional installation of qualified electrician is highly recommended.
- PLEASE NOTE THAT DESIGN AND COLOR MAY CHANGE FROM THE PICTURE SHOWN ABOVE
12Volt 5Amp, 60W SMPS/ Power Supply :
- Input Voltage: AC 90 – 264V 50 / 60Hz
- Output Voltage: 12V DC, 5A, and 60Watt
- Output Voltage: Adjustment Eange: andplusmn;20percent
- Output Voltage Type – DC ;Current
- Shell Material: Metal Case / Aluminum Base
- Color: Sliver
- Weight: 380g Approx
- Dimension: 158 x 98 x 42mm Approx
₹419.00₹499.0012V 5 Amp 60W DC Power Supply/SMPS for LED Strip and CCTV
₹419.00₹499.0014Pin Ic Base -1pc
- 14Pin ic socket the 14 pin ic socket or 14 pin ic base acts as a removable 14 pin ic holder that can be soldered directly to the pcb while the ic remains interchangeable
- Jdec standard compliant molded notch for proper orientation
- Easy to insert and remove ics applications of 14 pin ic socket: multiple DIY projects application requiring replaceable ics
Ic bases for 14pin can use to mount 14 pin ic.
₹25.00₹59.0014Pin Ic Base -1pc
₹25.00₹59.0016Pin Ic Base
- 16 Pin ic socket the 16 pin ic socket or 16 pin ic base acts as a removable 16 pin ic holder that can be soldered directly to the pcb while the ic remains interchangeable
- Jdec standard compliant molded notch for proper orientation
- Easy to insert and remove ics applications of 16 pin ic socket: multiple DIY projects application requiring replaceable ics
₹29.00₹59.0016Pin Ic Base
₹29.00₹59.0020Pin Ic Base -1pc
- 20Pin ic socket the 20 pin ic socket or 20 pin ic base acts as a removable 20 pin ic holder that can be soldered directly to the pcb while the ic remains interchangeable
- Jdec standard compliant molded notch for proper orientation
- Easy to insert and remove ics applications of 20 pin ic socket: multiple DIY projects application requiring replaceable ics
Ic bases for 20pin can use to mount 20 pin ic.
₹29.00₹59.0020Pin Ic Base -1pc
₹29.00₹59.0025 watt Soldering Iron Bit Set-1pc
- Nickel Plated Spade 3 mm Bit For 25 Watts Soldering Iron – 2 pcs
- For 25 Watts Soldering Iron
₹49.00₹79.0025 watt Soldering Iron Bit Set-1pc
₹49.00₹79.0028 Pin IC Base -2Pcs
DIP packages are usually made from an opaque molded epoxy plastic pressed around a tin-, silver-, or gold-plated lead frame that supports the device die and provides connection pins. Some types of IC are made in ceramic DIP packages, where high temperature or high reliability is required, or where the device has an optical window to the interior of the package. Most DIP packages are secured to a printed circuit board by inserting the pins through holes in the board and soldering them in place. Where frequent replacement of the parts is desired, such as in test fixtures or where programmable devices must be removed for changes, a DIP socket is used.
₹34.00₹59.0028 Pin IC Base -2Pcs
₹34.00₹59.003.7V To 5V 2A Boost Module DIY Power Bank Kit||Powerbank kit
Features:
1. 4 level LED lights show electricity, non-working state smart automatic shutdown;2. Built-in lithium battery protection IC, overcurrent, overvoltage, undervoltage protection;3. Dual USB output;4. Motherboard size: 69 x 32 x 8mm(L x W x H)₹249.00₹299.003.7V To 5V 2A Boost Module DIY Power Bank Kit||Powerbank kit
₹249.00₹299.0035watt Soldering Iron Bit Set-1pc
- Nickel Plated Spade 3 mm Bit For 35 Watts Soldering Iron – 2 pcs
- For 25 Watts Soldering Iron
₹59.00₹79.0035watt Soldering Iron Bit Set-1pc
₹59.00₹79.003Kg Load cell – Electronic Weighing Scale Sensor
A load cell is a transducer that is used to create an electrical signal whose magnitude is directly proportional to the force being measured. The various types of load cells include hydraulic load cells, pneumatic load cells and strain gauge load cells.
This is a standard load cell for measuring weight upto 3 Kg. The output of the load cell is in mili-volts and cannot be directly measured by a micro-controller. So an ADC with high resolution or an instrumentation amplifier is required to make the output of the load cell readable to a micro-controller.
₹450.00₹500.003Kg Load cell – Electronic Weighing Scale Sensor
₹450.00₹500.005V 1.2W Portable Flexible USB LED Light Lamp (Colors may vary)
- The side the LED light falls on will depend on your USB port orientation (non-standardized)
- This product can twist and bend without breaking. Use this to shine light as required
- Rated Voltage: 5V; Rated Power: 1.2W – Powered by any standard USB outlet (car charger, power bank, laptop etc.)
- Ideal for lighting small areas inside your car, as an alternative to your cabin light
- You might experience moderate heating from the LEDs – this is normal and won’t damage the product
₹39.00₹79.0060 watt Soldering Iron Bit Set-1pc
60 watt Soldering Iron Bit ,nickel plated best quality
₹69.00₹79.0060 watt Soldering Iron Bit Set-1pc
₹69.00₹79.006283 KIT single IC Audio Board with Bass Treble 30 W Stereo Amplifier Kit
Quality sound mini stereo board with all feature
Built in Bass Treble Voume connection, Potentiometer not included
Passive design, no ground loop at the end of the problem! And independent design with shielded ground, and audio signal ground completely separated, the clutter will not chaos string!
Power supply 12 V 2 amp, Input / Output sound : 2 channel stereo
This Audio board also include bridge rectifier with capacitor so can be directly connect with Transformer.₹149.00₹299.007 Segment Led Display Common Cathode – 5 Pcs
- Operating Voltage: 2V- 3.5V, Current: 20m Amps
- Read Frequency: 125 Khz
- Bread board friendly; LED Colour: Red
₹59.00₹99.007 Segment Led Display Common Cathode – 5 Pcs
₹59.00₹99.008 Watt Soldering Iron Bit
- Soldering Iron Tip
- Tip / Nozzle Style: Round
- Power Rating: Suitable for D03172 mini 8 Watt Soldering Station
- Tip Nozzle Width: 3.0mm
₹35.00₹49.008 Watt Soldering Iron Bit
₹35.00₹49.00AC Cord /Ac 2pin cord
- Design: Female connector plugs directly into device, and male connector plugs into standard outlet
- This is a polarized power cable created to connect a wall socket and your Laptop/notebook power brick
- This cable is used to connect an AC adapter or Lion-battery charger to an AC outlet
₹59.00₹99.00AC Cord /Ac 2pin cord
₹59.00₹99.00AC Power Jack
Features:
1) Suitable for small equipment development, a variety of specifications with center needle selection
2) With multiple shape size selection
3) Accordance with the requirements of the RoHS & Reach directiveApplication:
1. Audio products: MP3, MP4, DVD, stereo;
2.Digital products: digital camera, digital camera, etc.;
3. The remote control: vehicles, DianJuan door remote control, home security products;
4. Communication products, mobile phones, car telephone, telephone, building equipment, PDA;
5. Household appliances, TV sets, microwave ovens, rice cookers, electric wind, electronic kitchen scale, etc.;
6. Security products: video intercom, monitor, etc.;
7. Toys, electronic toys, etc.;
8. Computer products, camera, voice recorder, etc;
9. Fitness equipment, run machine, massage chairs, etc.;
10. Medical equipment: blood pressure, clinical thermometer, hospital call system₹19.00₹30.00AC Power Jack
₹19.00₹30.00Bracket for Ultrasonic Sensor Module – HC-SR04
Mounting Bracket for Ultrasonic Sensor Module – HC-SR04
Features:
- Thickness :2.8mm – 3.1mm
- Inner diameter: 16mm
- Diameter of mounting hole: 3.8mm
- Material: acrylic
- Usage: fixed ultrasonic sensor modules
* Product Images are shown for illustrative purposes only and may differ from actual product.
₹79.00₹99.00Bracket for Ultrasonic Sensor Module – HC-SR04
₹79.00₹99.00Buzzer 22mm 12V w/ Wire – Continuous Beep – 2Pcs
Specifications
- Rated voltage: 12V DC
- Min sound output at 10cm: 85 dB
- Resonant Frequency: 2300 ±300 Hz
- Color: Black
- Size: 22 x 12 mm (L x D)
- Lead Wire: 70mm
₹49.00₹69.00Buzzer 22mm 12V w/ Wire – Continuous Beep – 2Pcs
₹49.00₹69.00Buzzer PCB 12V – Active, Continuous Beep – 2Pcs
Specifications
- Material: ABS
- Color: Black
- Size: 9 x 11.8 mm (L x D)
- Rated voltage: 12V DC
- Operating voltage: 8 – 16V
- Min sound output at 10cm: 85 dB
- Resonant Frequency: 2300 ±300 Hz
- Operating Temperature: -20～+70℃
- Storage Temperature: -30～+85℃
- Breadboard Compatible: Yes
₹35.00₹59.00Buzzer PCB 12V – Active, Continuous Beep – 2Pcs
₹35.00₹59.00Condensor Microphone – 1pcs
Features:
- Small in size.
- Low cost.
- Easy to use.
- Light in weight.
- Applications of Condenser Microphone:
- It is used in Amplifier.
- It is used in Clap switch project.
₹35.00₹59.00Condensor Microphone – 1pcs
₹35.00₹59.00DB9 Male To Male 9 Pin Serial connector Adapter
Use this adapter to convert any DB9 cable with a female end to a null modem cable with a male end.
Features:
– Male 9 pin serial (DB9) connectors on each end
– Low profile design₹199.00₹299.00DB9 Male To Male 9 Pin Serial connector Adapter
₹199.00₹299.00DC power cord /dc Cable
1. Regulated computer power cable dc power cord for laptop
2. DC tip: 5.5*1.7mm
3. Lenggth: 1.2m/1.5m1.8m for option or customized4. High connectivity with not loss of transmission
5. Good quality with low price
6.100% open & short test
7. The DC right/angle plug diameter: 5.5 * 2.5 mm, 2.35 *0.7 mm, 4.8 * 1.7 mm, 5.5 * 1.7mm, 7.4 *5.0mm 5.5*2.1 mm and more size for optional.
₹25.00₹35.00DC power cord /dc Cable
₹25.00₹35.00DC Power Jack – Male – connector – 2Pc
DC Power Jack – Male – connector
₹22.00₹35.00DC Power Jack – Male – connector – 2Pc
₹22.00₹35.00DC Power Jack (Female Adapter) – 2Pc
DC Power Jack (Female Adaptor)
₹22.00₹35.00DC Power Jack (Female Adapter) – 2Pc
₹22.00₹35.00DC Power Jack (Female Adapter) – PCB Mount – 2Pcs
DC Power Jack (Female Adaptor) – PCB Mount
₹22.00₹35.00DC Power Jack (Female Adapter) – PCB Mount – 2Pcs
₹22.00₹35.00DC Toy Motor 3V-6V for Electronics Project (Multicolour) – 2 Pcs
- Colour: multicolour
- Ideal for hobbyists
- Simple toy dc motor
₹59.00₹99.00Digital Voltmeter Ammeter DC 0-100V 10A Dual LED Monitor Panel, Red and Blue
- Xcluma digital voltmeter ammeter dc 0-100v 10a dual led red blue monitor panel
- 100 percent brand new size: 48mm x 29mm x 21mm display color: Red and blue led (dual display) display: 028″ led digital
- Operating voltage: Dc 45 ~ 30v measure voltage: Dc 0 ~ 100v minimum resolution (v): 01v operating current: <20ma
- Measure current: 10a (direct measurement, built-in shunt) operating temperature: -10 to 65Ã’°c operating humidity: 10 to 80 percent (non-condensing) mounting cutout: 455mm x 265mm
- Measurement Accuracy: 1% (± 1 digit)
₹265.00₹399.00Female Header 1*40 single row
FEMALE HEADER BEST QUALITY COPPER PLATED
₹25.00₹39.00Female Header 1*40 single row
₹25.00₹39.00Glue Gun with 2-free Glue Sticks (60 Watt)
- Size: 11 mm diameter
- Comes with 2 Glue Sticks
- Design: Gun
₹219.00₹249.00Glue Gun with 2-free Glue Sticks (60 Watt)
₹219.00₹249.00
