No products in the cart.
-10%
Wireless Device Compare
Ubiquiti Networks LiteBeam M5 LBE-M5-23 Antenna
- High gain directional antenna
- Compact in size and light in weight
- The most cost-effective airMax CPE yet
- Best device at this range for client side
- Power 24V from POE
- Speed Upto 25 Mbps at a distance of 7 km
₹4,499.00 ₹4,999.00
- High gain directional antenna
- Compact in size and light in weight
- The most cost-effective airMax CPE yet
- Best device at this range for client side
- Speed Upto 25 Mbps at a distance of 7 km
Add a review
You must be logged in to post a review Log In
Related products
- PROGRAMMABLE BOARDS, Arduino, Boards
Arduino NANO V3.0 Development Board – Clone Compatible Model
-20%
PROGRAMMABLE BOARDS, Arduino, BoardsArduino NANO V3.0 Development Board – Clone Compatible Model
Specifications:-
- Microcontroller Atmel ATmega328 SMD Package
- Operating Voltage (logic level) 5 V
- Input Voltage (recommended) 7-12 V
- Input Voltage (limits) 6-20 V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins 8
- DC Current per I/O Pin 40 mA
- Flash Memory 32 KB (of which 2KB used by bootloader)
- SRAM 2 KB
- EEPROM 1 KB
- Clock Speed 16 MHz
- Dimensions 0.70” x 1.70
SKU: Arduino NANO V3.0 Development Board - Clone Compatible Model - PROGRAMMABLE BOARDS, Arduino, Boards
Arduino UNO R3 SMD Atmega328P Board – Clone Compatible Model
-11%
PROGRAMMABLE BOARDS, Arduino, BoardsArduino UNO R3 SMD Atmega328P Board – Clone Compatible Model
Specifications:-
Microcontroller : ATmega328 SMD.
Operating Voltage : 5V.
Supply Voltage recommended : 7-12V DC.
Digital I/O Pins : 14 (of which 6 provide PWM output).
Analog Input Pins : 6.
DC Current per I/O Pin : 40 mA.
DC Current for 3.3V Pin : 50 mA.
Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader.
SRAM : 2 KB (ATmega328).
EEPROM : 1 KB (ATmega328).
Clock Speed : 16 MHz.
SKU: Arduino UNO R3 SMD Atmega328P Board - Clone Compatible Model - PROGRAMMABLE BOARDS, Arduino, Accessories, Modules, Accessories, LCD, LED, Other Module
LCD 16X2 Yellow Backlight Alphanumeric Display For 8051,AVR,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green)
-40%
PROGRAMMABLE BOARDS, Arduino, Accessories, Modules, Accessories, LCD, LED, Other ModuleLCD 16X2 Yellow Backlight Alphanumeric Display For 8051,AVR,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green)
- A 16×2 LCD means it can display 16 characters per line and there are 2 such lines.
- In this LCD each character is displayed in 5×7 pixel matrix.JHD162A
- Black text on green background
- Connection port is 0.1″ pitch, single row for easy breadboarding and wiring
- Pins are documented on the back of the LCD to assist in wiring it up
SKU: LCD 16X2 Yellow Backlight Alphanumeric Display For 8051,AVR,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green) - Accessories, Modules, Shields, Accessories, Motor Driver
L293D IC BASED MOTOR DRIVER MODULE compatible with Arduino
-30%
Accessories, Modules, Shields, Accessories, Motor DriverL293D IC BASED MOTOR DRIVER MODULE compatible with Arduino
- CAN CONTROL DC GEARED MOTOR
- CAN BE EASILY INTERFACED WITH MICRO-CONTROLLER USING HEADER PINS
- COMPATIBLE WITH ARDUINO, RASPBERRY PI, ARM, AVR, PIC, 8051, etc – Can provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V.
- With Terminal Blocks for connecting motors & power supply and Berg Sticks for control signals from microcontroller
- Can control 2 DC Motors, their direction using control lines and their speed using PWM.
SKU: L293D IC BASED MOTOR DRIVER MODULE compatible with Arduino - Accessories, Accessories, Sensors
IR Sensor Module
Features of IR Sensor Module:-
- When the module detects obstacles in front of the signal, the circuit board green indicator light level, while the OUT port continuous output low-level signals, the module detects a distance of 2 ~ 10cm, detection angle 35 °, the detection distance can be potential adjustment with adjustment potentiometer clockwise, the increase in detection distance; counterclockwise adjustment potentiometer, the detection distance decreased.
- the sensor active infrared reflection detection, target reflectivity and shape of the detection distance of the key. The black minimum detection range, white maximum; small area object distance is small, a large area from the large.
- The sensor module output port OUT can be directly connected with the microcontroller IO port can also be driven directly to a 5V relay; Connection: VCC-VCC; GND-GND; OUT-IO.
- The comparator using LM393, stable.
- 3-5V DC power supply module can be used. When the power is turned on, the red power LED is lit.
- With the screw holes of 3mm, easy to install.
- Board size: 3.1CM * 1.5CM.
- Each module in the delivery has threshold comparator voltage adjustable via potentiometer, special circumstances, please do not adjust the potentiometer.
SKU: IR Sensor Module
Reviews
There are no reviews yet