No products in the cart.
Basic Components
Showing 91–105 of 181 results
- Resistance, Trim Potentiometer
500kohm Variable Resistor – Trimpot (504)-1Pc
Trimpot is a high accuracy variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the trimpot is rotated.
The Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and cetner pin outputs a variable volatge between 0v and Vcc as the rotary cermet is rotated.
Specifications:-
- Track Resistance: 500k
- Resistance Tolerance: ± 5%
- Temperature Coefficient: ± 50ppm/°C
- Potentiometer Mounting: Through Hole
- Adjustment Type: Top
- Contact Resistance Variation +: 1%
- Full Power Rating Temperature: 85°C
- Lead Diameter: 0.5mm
- Operating Temperature Range: -55°C to +125°C
- Resistance: 500k
- Resistor Element Material: Variable Rotary Trimmer
* Product Images are shown for illustrative purposes only and may differ from actual product.
SKU: POT_504 - Resistance, Trim Potentiometer
5kohm Variable Resistor – Trimpot (502)-1Pc
Trimpot is a high accuracy variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the trimpot is rotated.
The Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and cetner pin outputs a variable volatge between 0v and Vcc as the rotary cermet is rotated.
Specifications:-
- Track Resistance: 5k
- Resistance Tolerance: ± 5%
- Temperature Coefficient: ± 50ppm/°C
- Potentiometer Mounting: Through Hole
- Adjustment Type: Top
- Contact Resistance Variation +: 1%
- Full Power Rating Temperature: 85°C
- Lead Diameter: 0.5mm
- Operating Temperature Range: -55°C to +125°C
- Resistance: 5k
- Resistor Element Material: Variable Rotary Trimmer
* Product Images are shown for illustrative purposes only and may differ from actual product.
SKU: POT_502 - Hardware Parts, LED
5V 1.2W Portable Flexible USB LED Light Lamp (Colors may vary)
- The side the LED light falls on will depend on your USB port orientation (non-standardized)
- This product can twist and bend without breaking. Use this to shine light as required
- Rated Voltage: 5V; Rated Power: 1.2W – Powered by any standard USB outlet (car charger, power bank, laptop etc.)
- Ideal for lighting small areas inside your car, as an alternative to your cabin light
- You might experience moderate heating from the LEDs – this is normal and won’t damage the product
SKU: Led_usb
