- ×
Back Cover Transparent for Samsung Galaxy J7 Prime 1 × ₹149.00 - ×
Micromax Canvas A109 Rainbow Back Skin 1 × ₹70.00
Subtotal: ₹219.00
Basic Components
Showing 121–135 of 181 results
- Hardware Parts, Speakers
Piezobuzzer /Transducer/Piezoelectric Sensor/Buzzer -1Pc
- Converts Mechanical Force Into Electrical Output
- These Are Perfect For Using As Touch-Sensors, Electronic Drum Triggers, Buzzers, Or Making Your Own Contact Mics
- They Can Also Be Used For Custom Pickup Arrangements In More Traditional Stringed And Percussion Instruments.
SKU: Piezobuzzer - Accessories, Accessories, other ics, Sensors, Transistors
IC TSOP1738 – 2Pcs
TSOP module has an inbuilt control circuit for amplifying the coded pulses from the IR transmitter. A signal is generated when PIN photodiode receives the signals. This input signal is received by an automatic gain control (AGC). For a range of inputs, the output is fed back to AGC in order to adjust the gain to a suitable level. The signal from AGC is passed to a band pass filter to filter undesired frequencies. After this, the signal goes to a demodulator and this demodulated output drives an npn transistor. The collector output of the transistor is obtained at pin 3 of TSOP module.Members of TSOP17xx series are sensitive to different centre frequencies of the IR spectrum. For example TSOP1738 is sensitive to 38 kHz whereas TSOP1740 to 40 kHz centre frequency.SKU: IC TSOP1738 - 2Pcs - Accessories, Accessories, other ics, Sensors, Transistors
TSOP1838- 2Pcs
Features
- Photodetector and preamplifier circuit in the same casing.
- Receives and amplifies the infrared signal without any external component.
- 5 V output on idle (active at level 0).
- 38 kHz integrated oscillator.
- High sensitivity.
- High level of immunity to ambient light.
- Improved shielding against electrical field interference.
- TTL and CMOS compatibility.
- Applications: infrared remote control.
Technical specification
Supply: 5 V
Power consumption: 0.4 to 1.0 mA
Min. Ee irradiation: 0.35 mW/m2 typ.
Angle of detection: 90
Temperature range: -25 C to +85 CSKU: TSOP1838- 2Pcs - Connectors, Hardware Parts
USB Female Port Connector – 2 Pcs
- USB connectors are made with silver flashed brass contacts
- Ideal for making your own USB cables
- Fit for electronics power port repair or DIY projects power supply port
- Soldering is required
- Package Contents: 2x USB Female Port Connector. Limited lifetime Warranty and Product Support.
SKU: USB Female Port Connector - 2 Pcs - Hardware Parts, LED
5V 1.2W Portable Flexible USB LED Light Lamp (Colors may vary)
- The side the LED light falls on will depend on your USB port orientation (non-standardized)
- This product can twist and bend without breaking. Use this to shine light as required
- Rated Voltage: 5V; Rated Power: 1.2W – Powered by any standard USB outlet (car charger, power bank, laptop etc.)
- Ideal for lighting small areas inside your car, as an alternative to your cabin light
- You might experience moderate heating from the LEDs – this is normal and won’t damage the product
SKU: Led_usb - Transistors
TIP120 – Bipolar (BJT) Single Transistor, Darlington, NPN, 60 V, 65 W, 5 A, 1000 hFE – 1pc
-55%
TransistorsTIP120 – Bipolar (BJT) Single Transistor, Darlington, NPN, 60 V, 65 W, 5 A, 1000 hFE – 1pc
- Collector to emitter voltage (Vce) is 60V
- Collector current (Ic) is 5A
- Power dissipation (Pd) is 65W
- Collector to emitter saturation voltage of 4V at 5A collector current
- DC current gain (hFE) of 1000
- Operating junction temperature range from 150°C
SKU: TIP120 - Bipolar (BJT) Single Transistor, Darlington, NPN, 60 V, 65 W, 5 A, 1000 hFE - 1pc - Hardware Parts, Soldering components
Glue Stick-5Pcs
- Made in taiwan glue sticks
- Glue stick that is compatible with almost all standard glue gun. Even stanley glue gun
- Stick size: 228mm x 11mm or 9x 0.43inch . Standard diameter for use in standard size glue guns
- Applications – gluing plastic, metal, wood, fabric, ceramics, and cartons.multi-temperature and multi-purpose
- For use in glue guns | excellent for bonding heat-sensitive materials, as well as general applications. |
SKU: Glue_stick - Transistors
BC547 Transistor – 10pcs
BC547 is an NPN bi-polar junction transistor. A transistor, stands for transfer of resistance, is commonly used to amplify current. A small current at its base controls a larger current at collector & emitter terminals.BC547 is mainly used for amplification and switching purposes. It has a maximum current gain of 800. Its equivalent transistors are BC548 and BC549.SKU: BC547 Transistor - 10pcs
