PROGRAMMABLE BOARDS
Showing 61–75 of 94 results
- Accessories, Accessories, Other Module
Micro SD Card Slot Module, SPI Serial Peripheral Interface (TF card compatible)
-25%Accessories, Accessories, Other ModuleMicro SD Card Slot Module, SPI Serial Peripheral Interface (TF card compatible)
Features:
- Supports micro SD card (<=2G), micro SDHC card (<=32G) (high-speed card)
- Level conversion circuit board that can interface level is 5V or 3.3V
- Power supply is 3.3V ~ 5V, 3.3V voltage regulator circuit board
- Communication interface is a standard SPI interface
- 4 M2 screw positioning holes for easy installation
- Size: 4.1 x 2.4cm
SKU: Micro SD Card Slot Module, SPI Serial Peripheral Interface (TF card compatible) - Accessories, Sensors
MPU6050 – Triple Axis Gyro Accelerometer Module
Features:-
- Uses the popular MPU6050 IC
- MPU6050 contains a 3 axis Accelerometer and Gyroscope in a single package and simplifies design and usage. It also reduces cross axis alignment issues unlike other sensors with separate accelerometer and gyroscope ICs
- Digital I2C interface to read the output of the sensor
- Input Voltage: 2.3 – 3.4V
- Selectable Solder Jumpers on CLK, FSYNC and AD0
- Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
- Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
- Embedded algorithms for run-time bias and compass calibration. No user intervention required
- Digital-output temperature sensor
SKU: MPU6050 - Triple Axis Gyro Accelerometer Module - Accessories, Accessories, Other Module, Robot Parts
NEO-6M U-BLOX NEO-6M GPS Positioning Module to Serial TTL
-36%Accessories, Accessories, Other Module, Robot PartsNEO-6M U-BLOX NEO-6M GPS Positioning Module to Serial TTL
- Interface: UART interface, with logical level converter, 3.3V-5V interface compatible
- SunRobotics ublox neo-6m gps module (3.3V-5V interface with eeprom and flash)
- Board size: 23mm*40mm
- Antenna: High gain active anttenna and good performance. 25mm*25mm
SKU: NEO-6M U-BLOX NEO-6M GPS Positioning Module to Serial TTL - Boards
NODEMCU LOLiN – ESP8266 Wifi Development Board
Specification of Node-MCU IoT Module :-
It is based on ESP8266, integates GPIO, PWM, IIC, 1-Wire and ADC all in one board.
Power your developement in the fastest way combinating with NodeMCU Firmware!
USB-TTL included, plug&play
10 GPIO, every GPIO can be PWM, I2C, 1-wire
Features of Node-MCU IoT Module:-
Open source IoT Platform
Easily Programmable
Low cost & Simple to Implement
WI-FI enabled
SKU: NODEMCU LOLiN - ESP8266 Wifi Development Board - Boards
NodeMcu WiFi Development Board – ESP8266
Specifications and Features of Node MCU:-
- 11 b/g/n Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- CP2102 Serial / USB Chip
- +19.5dBm output power in 802.11b mode
- 4MB Flash Memory
- Integrated low power 32-bit CPU
- SDIO 1.1 / 2.0, SPI, UART
- Dimensions – 49 x 24.5 x 13mm
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- On board USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has on board 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
- Voltage Regulator / Converter, excellent DC to DC conversion, super efficient
SKU: NodeMcu WiFi Development Board - ESP8266 - Accessories, Accessories, Sensors
NRF24L01 + 2.4GHZ Wireless Transceiver module for Arduino
1 low working voltage: 1.9 ~ 3.6V low voltage operation 2 high speed: 2Mbps, due to the transmission time is very short, greatly reducing the collision phenomenon in the wireless transmission (air transmission rate software set 1Mbps or 2Mbps) 3 multi frequency: 125 frequency points, meet the multipoint communication and frequency hopping communication needs 4 tiny: built-in 2.4GHz antenna, small volume, 15x29mm (including antenna) 5 low power: when working in answer mode communication, air transport and starting time of fast, greatly reducing current consumption. 6 low cost: the NRF24L01 integrates all the relevant RF agreements and high-speed signal processing, such as: automatic retransmission of lost packets and automatically generate a response signal, SPI interface, NRF24L01 can use the hardware SPI port connection or by SCM I/O port simulation, internal FIFO and all kinds of high and low speed microprocessor interface, easy to use low cost microcontroller.
SKU: sensor_nrf24l01 - Accessories, Accessories, Sensors
NTC Themistor Module LM393 (Temperature up to 80 Degree Celsius)
-25%Accessories, Accessories, SensorsNTC Themistor Module LM393 (Temperature up to 80 Degree Celsius)
Features :
- NTC Thermistor sensor
- LM393 voltage comparator
- Mounting hole for easy installation
- Adjustable threshold via potentiometer
Specification :
- Operating Voltage: 3.3V DC to 5V DC
- Output Current: 15mA
- Output Type: Digital (HIGH OR LOW)
- PCB Size: 32 x 14mm
- Temperature Range: 20°C – 80°C
Package Include:
- 1x LM393 Thermal Sensor Module
SKU: NTC Themistor Module LM393 (Temperature up to 80 Degree Celsius) - Development Board
NUCLEO-L432KC – Development Board
The STM32 Nucleo-32 board provides an affordable and flexible way for users to try out new concepts and build prototypes with the STM32 microcontroller, choosing from the various combinations of performance, power consumption and features. The Arduino™ nano connectivity makes it easy to expand the functionality of the STM32 Nucleo open development platform with a choice of specialized shields.The STM32 Nucleo-32 board does not require any separate probe as it integrates the ST-LINK/V2-1 debugger/programmer and it comes with the STM32 comprehensive software HAL library, together with various packaged software examples, as well as direct access to the ARM® mbed™ on-line resources.- Extension with Arduino nano connectivity
- ARM® mbed™ enabled
- On-board ST-LINK/V2-1 debugger/programmer with SWD connector
- Flexible power supply options (USB or external PSU)
- Three LEDs: USB comms, power and user programmable
- Reset push-button
- Supported by wide range of IDEs, including IAR, Keil and GCC-based IDEs
Applications
Test & Measurement, Embedded Design & Development, IoT (Internet of Things)
SKU: STM_NucleoL432 - Accessories
Official Raspberry Pi Zero W Wireless Casing
Official Raspberry Pi Zero W Wireless Casing can support both Pi Zero W and Pi Zero V1.3 Boards.
It provides integrated Camera Support.
Do Checkout Raspberry Pi Zero W buy in india at best price.
Includes three interchangeable lids
Integrated camera support
Includes Pi Zero camera cable
* Product Images are shown for illustrative purposes only and may differ from actual product.
SKU: Official Raspberry Pi Zero W Wireless Casing - Accessories, Accessories, Sensors
Photo-resistor LDR Light Sensor Module (Light Dependent Resistor)
-27%Accessories, Accessories, SensorsPhoto-resistor LDR Light Sensor Module (Light Dependent Resistor)
Features:
- Able to detect ambient brightness and light intensity
- Adjustable sensitivity (via blue digital potentiometer adjustment)
- Operating voltage 3.3V-5V
- Digital switching outputs (0 and 1) -D0
- With fixed bolt hole for easy installation
- Small board PCB size: 3cm * 1.6cm
- Power indicator (Red) and the digital switch output indicator (Green)
- Features wide range voltage comparator LM393
SKU: Photo-resistor LDR Light Sensor Module (Light Dependent Resistor) - Accessories, Accessories, Sensors
PIR Motion Sensor Module HC-SR501 w/ Adjustable Delay Time & Output Signal – 1Pc
-24%Accessories, Accessories, SensorsPIR Motion Sensor Module HC-SR501 w/ Adjustable Delay Time & Output Signal – 1Pc
Key Features
- Detection range up to 20 feet
- Single bit output
- Jumper selection single or continuous trigger output mode
- 3-pin SIP header ready for breadboard or through-hole project
Specifications
- Operating voltage: DC 5 – 12V
- Static power consumption: 65 mA
- Output Signal: 3V TTL
- Detection Distance: Up to 6 meter (Adjustable)
- Sensing Range: Less than 120° degree angle, 6 meters
- Delay Time: 5 – 200s (Adjustable)
- Adjustable Trigger: L: non repeatable trigger – H: repeatable trigger
- Operating Temperature: -15 to +70°C
- Dimensions: 32 x 24mm, screw hole distance 28mm
SKU: PIR Motion Sensor Module HC-SR501 w/ Adjustable Delay Time & Output Signal - 1Pc - Accessories, Adapter
Quantum 2.0Amp Dual USB Port Wall Charger/Travel Charger Adapter with Micro USB Data Cable
-40%Accessories, AdapterQuantum 2.0Amp Dual USB Port Wall Charger/Travel Charger Adapter with Micro USB Data Cable
- ✅Powerful: 2 AMPS output; available for charging two tablets simultaneously, also other USB devices Exclusive smart Technology: Both USB ports are equipped with smart technology, which automatically detects and delivers the optimal charging current for connected devices.
- ✅Worldwide Voltage Compatible: INPUT 100- 240V AC , 50/ 60HZ, Output – 5V DC 2000 mA – ideal for home, business, and travel.
- ✅Multiple Safety System: Premium circuitry design with high-temperature, high-current, and over-charging protection.
- ✅Compatible for all Smart Phones, Tablets, IPad, iPod, MP3 Players, Gaming Consoles etc
SKU: Quantum 2.0Amp Dual USB Port Wall Charger/Travel Charger Adapter with Micro USB Data Cable - Accessories, Accessories, Sensors
Rain Sensor Raindrop Module
Features:
- FR-04 high-quality double-sided materials on sensor,
- King Size 5.0 * 4.0CM, and with the surface of the nickel plating treatment, against oxidative, conductivity, superior performance and longevity
- Current around 15mA
- Adjustable sensitivity
- Operating voltage 3.3V – 5V DC
- Output: Digital switching outputs (0 and 1) and Analog AO voltage output;
- PCB Size: 3.2cm x 1.4cm
- Wide voltage LM393 comparator
SKU: Rain Sensor Raindrop Module