Accessories
Showing 46–60 of 61 results
- Accessories, Accessories, Sensors
PIR Motion Sensor Module HC-SR501 w/ Adjustable Delay Time & Output Signal – 1Pc
-24%Accessories, Accessories, SensorsPIR Motion Sensor Module HC-SR501 w/ Adjustable Delay Time & Output Signal – 1Pc
Key Features
- Detection range up to 20 feet
- Single bit output
- Jumper selection single or continuous trigger output mode
- 3-pin SIP header ready for breadboard or through-hole project
Specifications
- Operating voltage: DC 5 – 12V
- Static power consumption: 65 mA
- Output Signal: 3V TTL
- Detection Distance: Up to 6 meter (Adjustable)
- Sensing Range: Less than 120° degree angle, 6 meters
- Delay Time: 5 – 200s (Adjustable)
- Adjustable Trigger: L: non repeatable trigger – H: repeatable trigger
- Operating Temperature: -15 to +70°C
- Dimensions: 32 x 24mm, screw hole distance 28mm
SKU: PIR Motion Sensor Module HC-SR501 w/ Adjustable Delay Time & Output Signal - 1Pc - Accessories, Adapter
Quantum 2.0Amp Dual USB Port Wall Charger/Travel Charger Adapter with Micro USB Data Cable
-40%Accessories, AdapterQuantum 2.0Amp Dual USB Port Wall Charger/Travel Charger Adapter with Micro USB Data Cable
- ✅Powerful: 2 AMPS output; available for charging two tablets simultaneously, also other USB devices Exclusive smart Technology: Both USB ports are equipped with smart technology, which automatically detects and delivers the optimal charging current for connected devices.
- ✅Worldwide Voltage Compatible: INPUT 100- 240V AC , 50/ 60HZ, Output – 5V DC 2000 mA – ideal for home, business, and travel.
- ✅Multiple Safety System: Premium circuitry design with high-temperature, high-current, and over-charging protection.
- ✅Compatible for all Smart Phones, Tablets, IPad, iPod, MP3 Players, Gaming Consoles etc
SKU: Quantum 2.0Amp Dual USB Port Wall Charger/Travel Charger Adapter with Micro USB Data Cable - Accessories, Accessories, Sensors
Rain Sensor Raindrop Module
Features:
- FR-04 high-quality double-sided materials on sensor,
- King Size 5.0 * 4.0CM, and with the surface of the nickel plating treatment, against oxidative, conductivity, superior performance and longevity
- Current around 15mA
- Adjustable sensitivity
- Operating voltage 3.3V – 5V DC
- Output: Digital switching outputs (0 and 1) and Analog AO voltage output;
- PCB Size: 3.2cm x 1.4cm
- Wide voltage LM393 comparator
SKU: Rain Sensor Raindrop Module - Accessories, Boards
Raspberry Pi Camera Board
- The board itself is tiny, at around 25mm x 20mm x 9mm and weighing in at just over 3g, making it perfect for mobile or other applications
- The sensor has a native resolution of 5 megapixel and has a fixed focus lens onboard
- The camera is capable of 2592 x 1944 pixel static images and also supports 1080p30, 720p60 and 640x480p60/90 video
SKU: Raspberry Pi Camera Board - Accessories, Accessories, Modules, Other Module
RC522 RFID Card Sensor Module to Send S50 Fudan Cards
-40%Accessories, Accessories, Modules, Other ModuleRC522 RFID Card Sensor Module to Send S50 Fudan Cards
- Current: 13-26mA or DC 3.3V
- Idle Current: 10-13mA or DC 3.3V
- Sleep Current: <80uA
- Peak Current: <30mA
- Operating Frequency: 13.56MHz
- Supported Card Types: Mifare1 S50, mifare1 S70, mifare ultralight, mifare Pro, mifare desfire product
- Physical Characteristics, Dimensions: 40mm — 60mm
SKU: RC522 RFID Card Sensor Module to Send S50 Fudan Cards - Accessories, Accessories, Modules, Other Module
RTC DS1307 I2C Module Real Time Clock for Arduino AVR ARM PIC without Battery – 1Pc
-32%Accessories, Accessories, Modules, Other ModuleRTC DS1307 I2C Module Real Time Clock for Arduino AVR ARM PIC without Battery – 1Pc
DS1307 I2C real time clock chip (RTC) 24C32 32K I2C EEPROM memory Using LIR2032 rechargeable lithium battery and charging circuit with DS1307 with battery backup can not solve the problem of literacy . Fully charged, can provide DS1307 timing 1 year. Compact design , 27mm * 28mm * 8.4mm Leads to the DS1307 clock pin provides the clock signal for the microcontroller
SKU: RTC DS1307 I2C Module Real Time Clock for Arduino AVR ARM PIC without Battery - 1Pc - Accessories, Accessories, Other Module, Robot Parts
SIM800L GPRS GSM Module Micro SIM Core Board QUAD-BAND Port TTL For Arduino
-50%Accessories, Accessories, Other Module, Robot PartsSIM800L GPRS GSM Module Micro SIM Core Board QUAD-BAND Port TTL For Arduino
- Ttl Serial Interface Compatible
- Microcontrollers,Compatible With Arduino
- This Sim800L Module Has A Set Of Ttl Level Serial Interface, A Set Of Power Supply Interface
- Imported From HongKong
- Warranty not applicable for this product
SKU: SIM800L GPRS GSM Module Micro SIM Core Board QUAD-BAND Port TTL For Arduino - Accessories, Accessories, Boards, Modules
Sim900A Gsm Modem Module with Sma Antenna
- Compatible with arduino, raspberry pi, arm, avr, pic, 8051, etc
- Best suited for gsm based microcontroller projects (better than sim300 and other gsm modems)
- Option for connecting mic and speaker directly to gsm modem for calls (line in also available)
- Supports communication through rs232 with db9 connector, ttl pins and i2c pins^call sms gprs facility – mic input, line input and speaker output pins^
SKU: Sim900_A - Accessories, Accessories, Sensors
Sound Sensor Module Sound Detection Module Arduino Other MCU
- Sound sensor module sound detection module main chip: Lm393, electret microphone
- Connector wire length: 245cm
- With 3 sets of servo horns and fittings
- Can be used for sonic lamp, with photosensitive sensors act as sound and light alarm, also can be used in the occasion of voice control and sound detection circuit boards output switch value
SKU: Sound Sensor Module Sound Detection Module Arduino Other MCU - Accessories, Kits, LCD
TFT LCD 5 Inch 800 x 480 HD Touch Screen For Raspberry PI 3 Model B/2 Model B/B+/A+/B
-8%Accessories, Kits, LCDTFT LCD 5 Inch 800 x 480 HD Touch Screen For Raspberry PI 3 Model B/2 Model B/B+/A+/B
- This 5 inch HDMI TFT LCD touch screen is special designed for Raspberry Pi. Note : Raspberry Pi not included.
- Power: 5V Power via GPIO from Raspberry pi Display Type: 5 inch TFT LCD Resolution: 800×480 Touchscreen: SPI Via Raspberry pi Dimensions: 120mm x 74mm x 7mm Weight without package: 125g Weight with package: 145g
- 800×480 resolution(HD), support for touch control Compatible and can be plugged directly into any version of Raspberry Pi (only except the first generation Pi model B which requires an HDMI cable.) User Manual provided, the official Raspberry Pi drive available Support any Raspberry Pi Image, Ubuntu, LinuxMint, Win 10 IOT and any more Universal HDMI display is not limited to raspberry pi (with resolution requirements) When only use for display only, does not occupy any I/O
- Package includes: 1 x 5inch HDMI LCD module 1 x HDMI connector 1 x Touch pen 1 x RPi screws pack (4pcs)
- http://wiki.52pi.com/index.php/5-Inch-800×480-HDMI-GPIO-Touch-Screen_SKU:EP-0072
SKU: TFT LCD 5 Inch 800 x 480 HD Touch Screen For Raspberry PI 3 Model B/2 Model B/B+/A+/B - Accessories, Accessories, other ics, Sensors, Transistors
TSOP1838- 2Pcs
Features
- Photodetector and preamplifier circuit in the same casing.
- Receives and amplifies the infrared signal without any external component.
- 5 V output on idle (active at level 0).
- 38 kHz integrated oscillator.
- High sensitivity.
- High level of immunity to ambient light.
- Improved shielding against electrical field interference.
- TTL and CMOS compatibility.
- Applications: infrared remote control.
Technical specification
Supply: 5 V
Power consumption: 0.4 to 1.0 mA
Min. Ee irradiation: 0.35 mW/m2 typ.
Angle of detection: 90
Temperature range: -25 C to +85 CSKU: TSOP1838- 2Pcs - Accessories, Accessories, Sensors
Ultrasonic Distance Sensor Module – HC-SR04
Features:
- Sensor Type: Ultrasonic
- Output: Digital Sensor
- Voltage: 5VDC
- Detection distance: 2cm-400cm (0.02M – 4.0M)
- Static current: < 2mA
- Level output: high-5V
- High precision: up to 0.3cm
SKU: Ultrasonic Distance Sensor Module - HC-SR04 - Accessories, Accessories, USB CABLE & PC peripherals
USB 2.0 A to Mini 5 pin B Cable for External HDDS/Camera/Card Readers/For Arduino nano
-54%Accessories, Accessories, USB CABLE & PC peripheralsUSB 2.0 A to Mini 5 pin B Cable for External HDDS/Camera/Card Readers/For Arduino nano
- Make plug-and-play connections with mobile phones, MP3 players, digital cameras and PDAs, External Hard Drives
- Ideal for transferring your pictures from your digital camera to your PC
- Connect a peripheral with a 5-Pin Mini-USB port to an USB Hub or USB port on PC
- Cable Length : 27 cm ,Compatible with USB 1.0, 1.1 and 2.0.
- Sync/charge Mini-USB enabled devices, from your laptop, computer & more
SKU: USB 2.0 A to Mini 5 pin B Cable for External HDDS/Camera/Card Readers/For Arduino nano - Accessories, Accessories, Bluetooth, Sensors
Wireless Bluetooth HC-05 [Master / Slave Mode] Serial Pass-Through Module w/ Backboard
-34%Accessories, Accessories, Bluetooth, SensorsWireless Bluetooth HC-05 [Master / Slave Mode] Serial Pass-Through Module w/ Backboard
Features
- Bluetooth v2.0+EDR
- 2.4GHz ISM band frequency
- Supported baud rate: 9600, 19200,38400(default), 57600, 115200, 230400, 460800.
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps
- Typical ‐80dBm sensitivity.
- Up to +4dBm RF transmit power.
- Power supply: 3.6V to 6V DC
- PIO control.
- UART interface with programmable baud rate.
- Built-in antenna.
- Coverage up to 30ft.
- Dimension: 38mm x 15mm x 2.35mm
SKU: Wireless Bluetooth HC-05 [Master / Slave Mode] Serial Pass-Through Module w/ Backboard