audio ic
Showing all 7 results
- Hardware Parts
6283 KIT single IC Audio Board with Bass Treble 30 W Stereo Amplifier Kit
Quality sound mini stereo board with all feature
Built in Bass Treble Voume connection, Potentiometer not included
Passive design, no ground loop at the end of the problem! And independent design with shielded ground, and audio signal ground completely separated, the clutter will not chaos string!
Power supply 12 V 2 amp, Input / Output sound : 2 channel stereo
This Audio board also include bridge rectifier with capacitor so can be directly connect with Transformer.SKU: KIT6283 - Audio ICs
KA2206B ic 2.3W DUAL AUDIO POWER AMP – 2pc
FEATURES
· High output power
Stereo : PO = 2.3W(Typ) at VCC = 9V, RL = 4W.
Bridge : PO = 4.7W (Typ) at VCC = 9V, RL = 8W
· Low switching distortion at high frequency.
· Small shock noise at the time of power on/off due to a
built-in muting circuit
· Good ripple rejection due to a built-in ripple filter.
· Good channel separation.
· Soft tone at the time of output saturation.
· Closed loop voltage gain fixed 45dB (Bridge : 51dB) but availability
with external resistor added.
· Minimum number of external parts required.
· Easy to design radiator fin.SKU: KA2206B ic 2.3W DUAL AUDIO POWER AMP - 2pc - Audio ICs
LA4440 6W 2channel bridge19 W Power amplifier IC – 1pc
Features of LA4440
- Built in two channels to use as Mono and Stereo
- Dual mode 6W x 2 and Bridge mode 19W
- 46 dB Ripple rejection
- 18V Max. Power handling and 12V typical
- Good channel separation and low distortion
- Built in Audio Muting function and Pin-to-Pin protection
- Surge protection circuitry
SKU: LA4440 6W 2channel bridge19 W Power amplifier IC - 1pc - Audio ICs
TDA2040 25-watt hi-fi audio power amplifier-1Pc
Features
■ Wide-range supply voltage, up to 40 V
■ Single or split power supply
■ Short-circuit protection to ground
■ Thermal shutdown
■ PO = 25 W @ THD = 0.5%, VS = ±17 V, RL= 4 Ω
■ PO = 30 W @ THD =10%, VS = ±17 V, RL = 4 ΩSKU: TDA2040 25-watt hi-fi audio power amplifier-1Pc