No products in the cart.
-33%
Inductor Compare
10uH Inductor – 10% Tol – 4Pieces pack
10 uH Inductor – 10% Tolerance – 2 Pieces pack
* Product Images are shown for illustrative purposes only and may differ from actual product.
₹20.00 ₹30.00
10 uH Inductor – 10% Tolerance – 2 Pieces pack
* Product Images are shown for illustrative purposes only and may differ from actual product.
Add a review
You must be logged in to post a review Log In
Related products
- PROGRAMMABLE BOARDS, Arduino, Boards
Arduino Mega 2560 R3 Board with USB Cable
Specifications:-
- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 256 KB of which 8 KB used by bootloader
- SRAM: 8 KB
- EEPROM: 4 KB
- Clock Speed: 16 MHz
- USB Host Chip: MAX3421E
- Length:101.98mm/4.01in
- Width:53.63mm/2.11in
- Height:15.29mm/0.60in
SKU: Arduino Mega 2560 R3 Board with USB Cable - PROGRAMMABLE BOARDS, Arduino, Boards
Arduino NANO V3.0 Development Board – Clone Compatible Model
-20%
PROGRAMMABLE BOARDS, Arduino, BoardsArduino NANO V3.0 Development Board – Clone Compatible Model
Specifications:-
- Microcontroller Atmel ATmega328 SMD Package
- Operating Voltage (logic level) 5 V
- Input Voltage (recommended) 7-12 V
- Input Voltage (limits) 6-20 V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins 8
- DC Current per I/O Pin 40 mA
- Flash Memory 32 KB (of which 2KB used by bootloader)
- SRAM 2 KB
- EEPROM 1 KB
- Clock Speed 16 MHz
- Dimensions 0.70” x 1.70
SKU: Arduino NANO V3.0 Development Board - Clone Compatible Model - Accessories, Modules, Shields, Motor Driver, Other Module
L298 Motor Driver Module Dual H Bridge DC Stepper for Arduino
-40%
Accessories, Modules, Shields, Motor Driver, Other ModuleL298 Motor Driver Module Dual H Bridge DC Stepper for Arduino
- A great set of tools to develop ESP8266,CP2102 chip, Built-in Micro-USB,with flash and reset switches
- ESP8266 has IO pin leads directly download without resetting
- USB: Micro USB port for power, programming and debugging
SKU: L298 Motor Driver Module Dual H Bridge DC Stepper for Arduino - Accessories, Sensors
MPU6050 – Triple Axis Gyro Accelerometer Module
Features:-
- Uses the popular MPU6050 IC
- MPU6050 contains a 3 axis Accelerometer and Gyroscope in a single package and simplifies design and usage. It also reduces cross axis alignment issues unlike other sensors with separate accelerometer and gyroscope ICs
- Digital I2C interface to read the output of the sensor
- Input Voltage: 2.3 – 3.4V
- Selectable Solder Jumpers on CLK, FSYNC and AD0
- Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
- Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
- Embedded algorithms for run-time bias and compass calibration. No user intervention required
- Digital-output temperature sensor
SKU: MPU6050 - Triple Axis Gyro Accelerometer Module
Reviews
There are no reviews yet