- ×
18650 3.7V 3000mAH Lithium Polymer (Li-Po) Battery 1 × ₹179.00 - ×
CP2102 USB to TTL USB UART Module Serial Converter 1 × ₹220.00
Subtotal: ₹399.00
-20%
Availability:
4 in stock
₹79.00 ₹99.00
4 in stock
- Type : Lead Acid
- Capacity : 1000 mAh
- Power : 4 Watt
Only logged in customers who have purchased this product may leave a review.
Related products
- PROGRAMMABLE BOARDS, Accessories, Modules, Shields, Development Board, Other Module
AESW5100 Ethernet Shield W5100 for Arduino UNO Mega 2560 1280 328
-29%
PROGRAMMABLE BOARDS, Accessories, Modules, Shields, Development Board, Other ModuleAESW5100 Ethernet Shield W5100 for Arduino UNO Mega 2560 1280 328
- Based on w5100 ethernet controller
- Supports all major arduino board
- Supported directly by arduino libraries
- Micro sd card can be used with this shield
SKU: AESW5100 Ethernet Shield W5100 for Arduino UNO Mega 2560 1280 328 - PROGRAMMABLE BOARDS, Arduino, Boards
Arduino Mega 2560 R3 Board with USB Cable
Specifications:-
- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 256 KB of which 8 KB used by bootloader
- SRAM: 8 KB
- EEPROM: 4 KB
- Clock Speed: 16 MHz
- USB Host Chip: MAX3421E
- Length:101.98mm/4.01in
- Width:53.63mm/2.11in
- Height:15.29mm/0.60in
SKU: Arduino Mega 2560 R3 Board with USB Cable - Accessories, Sensors
MPU6050 – Triple Axis Gyro Accelerometer Module
Features:-
- Uses the popular MPU6050 IC
- MPU6050 contains a 3 axis Accelerometer and Gyroscope in a single package and simplifies design and usage. It also reduces cross axis alignment issues unlike other sensors with separate accelerometer and gyroscope ICs
- Digital I2C interface to read the output of the sensor
- Input Voltage: 2.3 – 3.4V
- Selectable Solder Jumpers on CLK, FSYNC and AD0
- Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
- Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
- Embedded algorithms for run-time bias and compass calibration. No user intervention required
- Digital-output temperature sensor
SKU: MPU6050 - Triple Axis Gyro Accelerometer Module - PROGRAMMABLE BOARDS, Arduino, Boards
Lilypad Arduino 328 Main Board
The LilyPad Arduino Main Board is based on the ATmega328V. It features all digital and analog pins you would find on the Arduino UNO R3 (Digital 0-13 & Analog 0-5). to save space and make the board lighter they have removed the USB-port and USB to TTL chip, there for the Lily pad requires an FTDI to be programmed.
SKU: Lilypad Arduino 328 Main Board
Reviews
There are no reviews yet.