No products in the cart.
-21%
Accessories, Kits Compare
Arduino Starter Kit
Kit Includes :
- Arduino Uno R3 – 1 Pc
- Arduino Uno Cable – 1Pc
- Transistor BC547 – 3Pc
- IR sensor Module – 1Pc
- Potentiometer 22K or 100k or 47 K 1 PC
- HW 9 Watt Battery – 1P
- LDR -1Pc
- 5mm LED – 5Pc
- Male Male,Female Female,Male Female Connecting Wires : 5 Pc Each
₹549.00 ₹699.00
Kit Includes :
- Arduino Uno R3 – 1 Pc
- Arduino Uno Cable – 1Pc
- Transistor BC547 – 3Pc
- IR sensor Module – 1Pc
- Potentiometer 22K or 100k or 47 K 1 PC
- HW 9 Watt Battery with connector – 1P
- LDR -1Pc
- 5mm LED – 5Pc
- Male Male,Female Female,Male Female Connecting Wires : 5 Pc Each
Only logged in customers who have purchased this product may leave a review.
Related products
- Accessories, Modules, Shields, Accessories, Motor Driver
L293D IC BASED MOTOR DRIVER MODULE compatible with Arduino
-30%
Accessories, Modules, Shields, Accessories, Motor DriverL293D IC BASED MOTOR DRIVER MODULE compatible with Arduino
- CAN CONTROL DC GEARED MOTOR
- CAN BE EASILY INTERFACED WITH MICRO-CONTROLLER USING HEADER PINS
- COMPATIBLE WITH ARDUINO, RASPBERRY PI, ARM, AVR, PIC, 8051, etc – Can provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V.
- With Terminal Blocks for connecting motors & power supply and Berg Sticks for control signals from microcontroller
- Can control 2 DC Motors, their direction using control lines and their speed using PWM.
SKU: L293D IC BASED MOTOR DRIVER MODULE compatible with Arduino - Accessories, Sensors
MPU6050 – Triple Axis Gyro Accelerometer Module
Features:-
- Uses the popular MPU6050 IC
- MPU6050 contains a 3 axis Accelerometer and Gyroscope in a single package and simplifies design and usage. It also reduces cross axis alignment issues unlike other sensors with separate accelerometer and gyroscope ICs
- Digital I2C interface to read the output of the sensor
- Input Voltage: 2.3 – 3.4V
- Selectable Solder Jumpers on CLK, FSYNC and AD0
- Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
- Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
- Embedded algorithms for run-time bias and compass calibration. No user intervention required
- Digital-output temperature sensor
SKU: MPU6050 - Triple Axis Gyro Accelerometer Module - PROGRAMMABLE BOARDS, Arduino, Boards
Arduino Leonardo R3 Board
- Microcontroller: ATmega32u4
- Operating voltage: 5V
- Input voltage(recommended): 7V – 12V Input voltage(limits): 6V – 20V
- Digital I / O pins: 20 PWM channels: 7
- PWM channels: 7 Analog input channels: 12 DC current per I / O pin: 40mA
SKU: Arduino Leonardo R3 Board - PROGRAMMABLE BOARDS, Arduino, Boards
Arduino NANO V3.0 Development Board – Clone Compatible Model
-20%
PROGRAMMABLE BOARDS, Arduino, BoardsArduino NANO V3.0 Development Board – Clone Compatible Model
Specifications:-
- Microcontroller Atmel ATmega328 SMD Package
- Operating Voltage (logic level) 5 V
- Input Voltage (recommended) 7-12 V
- Input Voltage (limits) 6-20 V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins 8
- DC Current per I/O Pin 40 mA
- Flash Memory 32 KB (of which 2KB used by bootloader)
- SRAM 2 KB
- EEPROM 1 KB
- Clock Speed 16 MHz
- Dimensions 0.70” x 1.70
SKU: Arduino NANO V3.0 Development Board - Clone Compatible Model - PROGRAMMABLE BOARDS, Arduino, Boards
Lilypad Arduino 328 Main Board
The LilyPad Arduino Main Board is based on the ATmega328V. It features all digital and analog pins you would find on the Arduino UNO R3 (Digital 0-13 & Analog 0-5). to save space and make the board lighter they have removed the USB-port and USB to TTL chip, there for the Lily pad requires an FTDI to be programmed.
SKU: Lilypad Arduino 328 Main Board
Reviews
There are no reviews yet.