No products in the cart.
-34%
Hardware Parts, Testing Tools Compare
Digital Voltmeter Ammeter DC 0-100V 10A Dual LED Monitor Panel, Red and Blue
- Xcluma digital voltmeter ammeter dc 0-100v 10a dual led red blue monitor panel
- 100 percent brand new size: 48mm x 29mm x 21mm display color: Red and blue led (dual display) display: 028″ led digital
- Operating voltage: Dc 45 ~ 30v measure voltage: Dc 0 ~ 100v minimum resolution (v): 01v operating current: <20ma
- Measure current: 10a (direct measurement, built-in shunt) operating temperature: -10 to 65Ã’°c operating humidity: 10 to 80 percent (non-condensing) mounting cutout: 455mm x 265mm
- Measurement Accuracy: 1% (± 1 digit)
₹265.00 ₹399.00
- Xcluma digital voltmeter ammeter dc 0-100v 10a dual led red blue monitor panel
- 100 percent brand new size: 48mm x 29mm x 21mm display color: Red and blue led (dual display) display: 028″ led digital
- Operating voltage: Dc 45 ~ 30v measure voltage: Dc 0 ~ 100v minimum resolution (v): 01v operating current: <20ma
- Measure current: 10a (direct measurement, built-in shunt) operating temperature: -10 to 65Ã’°c operating humidity: 10 to 80 percent (non-condensing) mounting cutout: 455mm x 265mm
- Measurement Accuracy: 1% (± 1 digit)
Add a review
You must be logged in to post a review Log In
Related products
- PROGRAMMABLE BOARDS, Arduino, Boards
Arduino UNO R3 SMD Atmega328P Board – Clone Compatible Model
-11%
PROGRAMMABLE BOARDS, Arduino, BoardsArduino UNO R3 SMD Atmega328P Board – Clone Compatible Model
Specifications:-
Microcontroller : ATmega328 SMD.
Operating Voltage : 5V.
Supply Voltage recommended : 7-12V DC.
Digital I/O Pins : 14 (of which 6 provide PWM output).
Analog Input Pins : 6.
DC Current per I/O Pin : 40 mA.
DC Current for 3.3V Pin : 50 mA.
Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader.
SRAM : 2 KB (ATmega328).
EEPROM : 1 KB (ATmega328).
Clock Speed : 16 MHz.
SKU: Arduino UNO R3 SMD Atmega328P Board - Clone Compatible Model - Accessories, Modules, Shields, Accessories, Motor Driver
L293D IC BASED MOTOR DRIVER MODULE compatible with Arduino
-30%
Accessories, Modules, Shields, Accessories, Motor DriverL293D IC BASED MOTOR DRIVER MODULE compatible with Arduino
- CAN CONTROL DC GEARED MOTOR
- CAN BE EASILY INTERFACED WITH MICRO-CONTROLLER USING HEADER PINS
- COMPATIBLE WITH ARDUINO, RASPBERRY PI, ARM, AVR, PIC, 8051, etc – Can provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V.
- With Terminal Blocks for connecting motors & power supply and Berg Sticks for control signals from microcontroller
- Can control 2 DC Motors, their direction using control lines and their speed using PWM.
SKU: L293D IC BASED MOTOR DRIVER MODULE compatible with Arduino - USB CABLE & PC peripherals, Accessories
High Speed USB 2.0 Cable For mobile charging||USB Data Cable
-40%
USB CABLE & PC peripherals, AccessoriesHigh Speed USB 2.0 Cable For mobile charging||USB Data Cable
- White
- Fast Charging Speed
- White
Fast Charging SpeedGenuine OutputBest Quality100% Compatible
- Genuine OutputBest Quality100% Compatible
- Brand: SAP
- Current Max: 1.0 Amp
SKU: High Speed USB 2.0 Cable For mobile charging||USB Data Cable - PROGRAMMABLE BOARDS, Arduino, Boards
Arduino Mega 2560 R3 Board with USB Cable
Specifications:-
- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 256 KB of which 8 KB used by bootloader
- SRAM: 8 KB
- EEPROM: 4 KB
- Clock Speed: 16 MHz
- USB Host Chip: MAX3421E
- Length:101.98mm/4.01in
- Width:53.63mm/2.11in
- Height:15.29mm/0.60in
SKU: Arduino Mega 2560 R3 Board with USB Cable
Reviews
There are no reviews yet