No products in the cart.
-43%
Transistors Compare
TIP142 – Bipolar (BJT) Single Transistor, Darlington, NPN, 100 V, 125 W, 10 A, 1000 hFE – 1Pc
- Collector emitter voltage (Vce) of 100V
- Continuous collector current (Ic) of 10A
- Power dissipation of 125W
- Operating junction temperature range from -65°C to 150°C
- Collector emitter saturation voltage of 2V at Ic=5A
- DC current gain of 500 at Ic=10A
- Multicomp products are rated 4.6 out of 5 stars
- 12 month limited warranty *view Terms & Conditions for details
- 96% of customers would recommend to a friend
Availability:
2 in stock
₹79.00 ₹139.00
2 in stock
The TIP142 from Multicomp are through hole, darlington transistor in TO-247(3P) package. This transistor is used for low speed switching and amplification.
- Collector emitter voltage (Vce) of 100V
- Continuous collector current (Ic) of 10A
- Power dissipation of 125W
- Operating junction temperature range from -65°C to 150°C
- Collector emitter saturation voltage of 2V at Ic=5A
- DC current gain of 500 at Ic=10A
- Multicomp products are rated 4.6 out of 5 stars
- 12 month limited warranty *view Terms & Conditions for details
- 96% of customers would recommend to a friend
Applications
Signal Processing, Power Management, Portable Devices, Consumer Electronics, Industrial
Add a review
You must be logged in to post a review Log In
Related products
- PROGRAMMABLE BOARDS, Arduino, Boards
Arduino UNO R3 Development Board
Features:-
- Microcontroller: ATmega328P.
- Operating Voltage: 5V.
- Input Voltage: 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6.
- DC Current: 40mA.
- Flash Memory: 32 KB.
- SRAM: 2 KB.
- EEPROM: 1 KB.
- Clock Speed: 16 MHz.
Applications:-
- DIY project prototyping.
- Developing varied varieties of projects that require a code based control.
- Automation System development.
- Learning AVR programming.
- Entry level circuit designing.
SKU: Arduino UNO R3 Development Board - Accessories, Sensors
MPU6050 – Triple Axis Gyro Accelerometer Module
Features:-
- Uses the popular MPU6050 IC
- MPU6050 contains a 3 axis Accelerometer and Gyroscope in a single package and simplifies design and usage. It also reduces cross axis alignment issues unlike other sensors with separate accelerometer and gyroscope ICs
- Digital I2C interface to read the output of the sensor
- Input Voltage: 2.3 – 3.4V
- Selectable Solder Jumpers on CLK, FSYNC and AD0
- Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
- Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
- Embedded algorithms for run-time bias and compass calibration. No user intervention required
- Digital-output temperature sensor
SKU: MPU6050 - Triple Axis Gyro Accelerometer Module - Accessories, Modules, Shields, Motor Driver, Other Module
L298 Motor Driver Module Dual H Bridge DC Stepper for Arduino
-40%
Accessories, Modules, Shields, Motor Driver, Other ModuleL298 Motor Driver Module Dual H Bridge DC Stepper for Arduino
- A great set of tools to develop ESP8266,CP2102 chip, Built-in Micro-USB,with flash and reset switches
- ESP8266 has IO pin leads directly download without resetting
- USB: Micro USB port for power, programming and debugging
SKU: L298 Motor Driver Module Dual H Bridge DC Stepper for Arduino - Accessories, Accessories, Sensors
IR Sensor Module
Features of IR Sensor Module:-
- When the module detects obstacles in front of the signal, the circuit board green indicator light level, while the OUT port continuous output low-level signals, the module detects a distance of 2 ~ 10cm, detection angle 35 °, the detection distance can be potential adjustment with adjustment potentiometer clockwise, the increase in detection distance; counterclockwise adjustment potentiometer, the detection distance decreased.
- the sensor active infrared reflection detection, target reflectivity and shape of the detection distance of the key. The black minimum detection range, white maximum; small area object distance is small, a large area from the large.
- The sensor module output port OUT can be directly connected with the microcontroller IO port can also be driven directly to a 5V relay; Connection: VCC-VCC; GND-GND; OUT-IO.
- The comparator using LM393, stable.
- 3-5V DC power supply module can be used. When the power is turned on, the red power LED is lit.
- With the screw holes of 3mm, easy to install.
- Board size: 3.1CM * 1.5CM.
- Each module in the delivery has threshold comparator voltage adjustable via potentiometer, special circumstances, please do not adjust the potentiometer.
SKU: IR Sensor Module
Reviews
There are no reviews yet