TP4056 – 1A – Li-Ion Lithium Battery charging Module – Micro USB
TP4056 – 1A – Lithium Battery charging Module – Micro USB
* Product Images are shown for illustrative purposes only and may differ from actual product.
TP4056 – 1A – Lithium Battery charging Module – Micro USB
* Product Images are shown for illustrative purposes only and may differ from actual product.
Only logged in customers who have purchased this product may leave a review.
Related products
- Accessories, Sensors
MPU6050 – Triple Axis Gyro Accelerometer Module
Rated 4.00 out of 5(1)Features:-
- Uses the popular MPU6050 IC
- MPU6050 contains a 3 axis Accelerometer and Gyroscope in a single package and simplifies design and usage. It also reduces cross axis alignment issues unlike other sensors with separate accelerometer and gyroscope ICs
- Digital I2C interface to read the output of the sensor
- Input Voltage: 2.3 – 3.4V
- Selectable Solder Jumpers on CLK, FSYNC and AD0
- Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
- Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
- Embedded algorithms for run-time bias and compass calibration. No user intervention required
- Digital-output temperature sensor
SKU: MPU6050 - Triple Axis Gyro Accelerometer Module₹189.00₹299.00 - Accessories, Modules, Shields, Motor Driver, Other Module
L298 Motor Driver Module Dual H Bridge DC Stepper for Arduino
-40%Accessories, Modules, Shields, Motor Driver, Other ModuleL298 Motor Driver Module Dual H Bridge DC Stepper for Arduino
Rated 5.00 out of 5(2)- A great set of tools to develop ESP8266,CP2102 chip, Built-in Micro-USB,with flash and reset switches
- ESP8266 has IO pin leads directly download without resetting
- USB: Micro USB port for power, programming and debugging
SKU: L298 Motor Driver Module Dual H Bridge DC Stepper for Arduino₹179.00₹299.00 - PROGRAMMABLE BOARDS, Arduino, Boards
Arduino UNO R3 SMD Atmega328P Board – Clone Compatible Model
-11%PROGRAMMABLE BOARDS, Arduino, BoardsArduino UNO R3 SMD Atmega328P Board – Clone Compatible Model
0 out of 5(0)Specifications:-
Microcontroller : ATmega328 SMD.
Operating Voltage : 5V.
Supply Voltage recommended : 7-12V DC.
Digital I/O Pins : 14 (of which 6 provide PWM output).
Analog Input Pins : 6.
DC Current per I/O Pin : 40 mA.
DC Current for 3.3V Pin : 50 mA.
Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader.
SRAM : 2 KB (ATmega328).
EEPROM : 1 KB (ATmega328).
Clock Speed : 16 MHz.
SKU: Arduino UNO R3 SMD Atmega328P Board - Clone Compatible Model - PROGRAMMABLE BOARDS, Arduino, Boards
Arduino Leonardo R3 Board
0 out of 5(0)- Microcontroller: ATmega32u4
- Operating voltage: 5V
- Input voltage(recommended): 7V – 12V Input voltage(limits): 6V – 20V
- Digital I / O pins: 20 PWM channels: 7
- PWM channels: 7 Analog input channels: 12 DC current per I / O pin: 40mA
SKU: Arduino Leonardo R3 Board - Accessories, Accessories, Sensors
IR Sensor Module
0 out of 5(0)Features of IR Sensor Module:-
- When the module detects obstacles in front of the signal, the circuit board green indicator light level, while the OUT port continuous output low-level signals, the module detects a distance of 2 ~ 10cm, detection angle 35 °, the detection distance can be potential adjustment with adjustment potentiometer clockwise, the increase in detection distance; counterclockwise adjustment potentiometer, the detection distance decreased.
- the sensor active infrared reflection detection, target reflectivity and shape of the detection distance of the key. The black minimum detection range, white maximum; small area object distance is small, a large area from the large.
- The sensor module output port OUT can be directly connected with the microcontroller IO port can also be driven directly to a 5V relay; Connection: VCC-VCC; GND-GND; OUT-IO.
- The comparator using LM393, stable.
- 3-5V DC power supply module can be used. When the power is turned on, the red power LED is lit.
- With the screw holes of 3mm, easy to install.
- Board size: 3.1CM * 1.5CM.
- Each module in the delivery has threshold comparator voltage adjustable via potentiometer, special circumstances, please do not adjust the potentiometer.
SKU: IR Sensor Module₹69.00₹149.00
Reviews
There are no reviews yet.