No products in the cart.
-20%
Sensors Compare
PLSNSR1 Pulse Sensor Amped Heart Rate Sensor for Arduino Raspberry Pi
- Pulse sensor is an open source hardware project
- Diameter = 0. 625″ (~16Mm)
- Voltage = 3v to 5v
- Current consumption = ~4ma at 5v
₹279.00 ₹349.00
- Pulse sensor is an open source hardware project
- Diameter = 0. 625″ (~16Mm)
- Voltage = 3v to 5v
- Current consumption = ~4ma at 5v
Add a review
You must be logged in to post a review Log In
Related products
- PROGRAMMABLE BOARDS, Arduino, Boards
Arduino Pro Mini – ATMEGA 328P – AU 5V -16Mhz
- New mini atmega328 replace aTmega128 for Arduino-compatible nano module
- Package Included: 1 x Arduino pro min atmega328p board, 3 x gilded pin
- Analog Pins: 8 Digital I or Os: 14
- Supports auto-reset
SKU: Arduino Pro Mini - ATMEGA 328P - AU 5V -16Mhz - PROGRAMMABLE BOARDS, Arduino, Boards
Arduino UNO R3 SMD Atmega328P Board – Clone Compatible Model
-11%
PROGRAMMABLE BOARDS, Arduino, BoardsArduino UNO R3 SMD Atmega328P Board – Clone Compatible Model
Specifications:-
Microcontroller : ATmega328 SMD.
Operating Voltage : 5V.
Supply Voltage recommended : 7-12V DC.
Digital I/O Pins : 14 (of which 6 provide PWM output).
Analog Input Pins : 6.
DC Current per I/O Pin : 40 mA.
DC Current for 3.3V Pin : 50 mA.
Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader.
SRAM : 2 KB (ATmega328).
EEPROM : 1 KB (ATmega328).
Clock Speed : 16 MHz.
SKU: Arduino UNO R3 SMD Atmega328P Board - Clone Compatible Model - PROGRAMMABLE BOARDS, Arduino, Boards
Arduino NANO V3.0 Development Board – Clone Compatible Model
-20%
PROGRAMMABLE BOARDS, Arduino, BoardsArduino NANO V3.0 Development Board – Clone Compatible Model
Specifications:-
- Microcontroller Atmel ATmega328 SMD Package
- Operating Voltage (logic level) 5 V
- Input Voltage (recommended) 7-12 V
- Input Voltage (limits) 6-20 V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins 8
- DC Current per I/O Pin 40 mA
- Flash Memory 32 KB (of which 2KB used by bootloader)
- SRAM 2 KB
- EEPROM 1 KB
- Clock Speed 16 MHz
- Dimensions 0.70” x 1.70
SKU: Arduino NANO V3.0 Development Board - Clone Compatible Model - Accessories, Sensors
MPU6050 – Triple Axis Gyro Accelerometer Module
Features:-
- Uses the popular MPU6050 IC
- MPU6050 contains a 3 axis Accelerometer and Gyroscope in a single package and simplifies design and usage. It also reduces cross axis alignment issues unlike other sensors with separate accelerometer and gyroscope ICs
- Digital I2C interface to read the output of the sensor
- Input Voltage: 2.3 – 3.4V
- Selectable Solder Jumpers on CLK, FSYNC and AD0
- Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
- Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
- Embedded algorithms for run-time bias and compass calibration. No user intervention required
- Digital-output temperature sensor
SKU: MPU6050 - Triple Axis Gyro Accelerometer Module
Reviews
There are no reviews yet