Basic Components
Showing 136–150 of 181 results
- Hardware Parts, Testing Tools
Digital Voltmeter Ammeter DC 0-100V 10A Dual LED Monitor Panel, Red and Blue
-34%Hardware Parts, Testing ToolsDigital Voltmeter Ammeter DC 0-100V 10A Dual LED Monitor Panel, Red and Blue
- Xcluma digital voltmeter ammeter dc 0-100v 10a dual led red blue monitor panel
- 100 percent brand new size: 48mm x 29mm x 21mm display color: Red and blue led (dual display) display: 028″ led digital
- Operating voltage: Dc 45 ~ 30v measure voltage: Dc 0 ~ 100v minimum resolution (v): 01v operating current: <20ma
- Measure current: 10a (direct measurement, built-in shunt) operating temperature: -10 to 65Ã’°c operating humidity: 10 to 80 percent (non-condensing) mounting cutout: 455mm x 265mm
- Measurement Accuracy: 1% (± 1 digit)
SKU: Digital_voltmeter_DC - Hardware Parts, Soldering components
Glue Stick-5Pcs
- Made in taiwan glue sticks
- Glue stick that is compatible with almost all standard glue gun. Even stanley glue gun
- Stick size: 228mm x 11mm or 9x 0.43inch . Standard diameter for use in standard size glue guns
- Applications – gluing plastic, metal, wood, fabric, ceramics, and cartons.multi-temperature and multi-purpose
- For use in glue guns | excellent for bonding heat-sensitive materials, as well as general applications. |
SKU: Glue_stick - Accessories, Accessories, other ics, Sensors, Transistors
IC TSOP1738 – 2Pcs
TSOP module has an inbuilt control circuit for amplifying the coded pulses from the IR transmitter. A signal is generated when PIN photodiode receives the signals. This input signal is received by an automatic gain control (AGC). For a range of inputs, the output is fed back to AGC in order to adjust the gain to a suitable level. The signal from AGC is passed to a band pass filter to filter undesired frequencies. After this, the signal goes to a demodulator and this demodulated output drives an npn transistor. The collector output of the transistor is obtained at pin 3 of TSOP module.Members of TSOP17xx series are sensitive to different centre frequencies of the IR spectrum. For example TSOP1738 is sensitive to 38 kHz whereas TSOP1740 to 40 kHz centre frequency.SKU: IC TSOP1738 - 2Pcs - Accessories, Accessories, Wires & Cables
Jumper Wires Male-male , male-female ,female -female -20 Pcs each
-10%Accessories, Accessories, Wires & CablesJumper Wires Male-male , male-female ,female -female -20 Pcs each
Jumper Wires to connect differernt components on breadboard . Best Quality Copper Plated High Conductivity
Package includes :
20 Pcs Male -Male Jumper Wires
20 Pcs Male -Female Jumper Wires
20 Pcs Female -Female Jumper Wires
SKU: Jumper Wires Male-male , male-female ,female -female -20 Pcs each - Accessories, Accessories, Wires & Cables
Jumper Wires Female To Female/Breadboard Jumper Wires (FF 40)
-23%Accessories, Accessories, Wires & CablesJumper Wires Female To Female/Breadboard Jumper Wires (FF 40)
- 40 pc female to female jumper wire ;Each cable length about 20cm or 8-inch
- The male ends meant for insertion into standard 0.1 inch (2.54mm) female sockets and the female ends are meant for insertion onto standard 0.1 inch (2.54mm) male headers
- Suitable for Arduino breadboard kit project, PCB project, pc motherboard, etc
- aptechdeals.com Building Kits
- Through the pin connection, without welding, fit for fast circuit test.
SKU: Jumper Wires Female To Female/Breadboard Jumper Wires (FF 40)