No products in the cart.
Power supply Modules
Showing all 5 results
- Power supply Modules, SMPS
12V 10Amp 120W DC Power Suply for CCTV and LED Strip light
* Input Voltage: AC 90 – 264V 50 / 60Hz
* Output Voltage: 12V DC, 10A, and 120W
* Output voltage: Adjustment Eange: ±20%
* Protections: Overload / Over Voltage / Short Circuit
* Auto-Recovery After Protection
* Short Circuit Protection: The power supply will be auto recovered when short circuit faults remove.
* The power supply will be auto recovered when over current faults remove.
* The power supply will not be auto recovered when faults remove.
* Universal AC input / Full range
* 100% Full Load Burn-in Test
* Cooling by Free Air Convection
* It’s Good Quality and High Performance
* Great Switching Power Supply for Home Appliances
* 12V 10A Double Output Switch Switching Low-cost Power Supply
* LED power supply with a metal body for hidden installation for LED lighting with an energy consumption of maximum 120W
* Design with Built-in EMI Filter, improve signal precision.
* EMC Standards: According with GB9254, EN55022 class A, EN61347-2-13:2008 Standards
* Certifications: CE & RoHs
* Meet CEC Energy Efficiency Level IV.
* No Minimum Load.
* Compact Size Light Weight.
* High Reliability.
* High Efficiency & low energy consumption
* Category – Switch Mode Power Adaptor (SMPS)
* MTBF >50,000 hours
* Output Type – DC
* Output – 12Volts 10Amp
* Shell Material: Metal Case / Aluminum Base
* Color: Sliver
* Weight: Around 500g
* Dimension: (199 x 98 x 42) mm / (7.80 x 3.85 x 1.57) inch (L x W x H)
* IN-DOOR USE ONLY!
* This Power Supply Unit; DOES NOT; come with installation instruction, wiring cable, on/off switch, or screws. Professional installation of qualified electrician is highly recommended.SKU: Power-Supply_12_10 - Hardware Parts, Power supply Modules, SMPS
12V 5 Amp 60W DC Power Supply/SMPS for LED Strip and CCTV
-16%
Hardware Parts, Power supply Modules, SMPS12V 5 Amp 60W DC Power Supply/SMPS for LED Strip and CCTV
- Great Switching Power Supply for Home Appliances
- Design with Built-in EMI Filter, Improve Signal Precision.
- Approvals: 3C/FC/ CE
- EMC Standards: According with GB9254, EN55022 class A, EN61347-2-13:2008 Standards
- Certifications: CE andamp; RoHs
- Meet CEC Energy Efficiency Level IV.
- Power LED Monitor (LED Glow when in Use)
- Category – Switch Mode Power Adaptor (SMPS)
- MTBF 50,000 hours
- IN-DOOR USE ONLY!
- This Power Supply Unit andquot;DOES NOTandquot; comes with installation instruction, wiring cable, on/off switch, or screws. Professional installation of qualified electrician is highly recommended.
- PLEASE NOTE THAT DESIGN AND COLOR MAY CHANGE FROM THE PICTURE SHOWN ABOVE
12Volt 5Amp, 60W SMPS/ Power Supply :
- Input Voltage: AC 90 – 264V 50 / 60Hz
- Output Voltage: 12V DC, 5A, and 60Watt
- Output Voltage: Adjustment Eange: andplusmn;20percent
- Output Voltage Type – DC ;Current
- Shell Material: Metal Case / Aluminum Base
- Color: Sliver
- Weight: 380g Approx
- Dimension: 158 x 98 x 42mm Approx
SKU: Power_Supply_12_5 - Hardware Parts, Power supply Modules, SMPS
3.7V To 5V 2A Boost Module DIY Power Bank Kit||Powerbank kit
-17%
Hardware Parts, Power supply Modules, SMPS3.7V To 5V 2A Boost Module DIY Power Bank Kit||Powerbank kit
Features:
1. 4 level LED lights show electricity, non-working state smart automatic shutdown;2. Built-in lithium battery protection IC, overcurrent, overvoltage, undervoltage protection;3. Dual USB output;4. Motherboard size: 69 x 32 x 8mm(L x W x H)SKU: 3.7V To 5V 2A Boost Module DIY Power Bank Kit||Powerbank kit - Power supply Modules
LM2596S DC-Dc Buck Converter Step-Down Adjustable Power Supply
- This DC to DC Step-Down Adjustable Power Supply Module is based on the LM2596 switching regulator
- Input voltage: DC 3.2V to 40V (input voltage must be higher than the output voltage above 1.5V. Could not boost)
- Output Voltage: DC voltage from 1.25V to 35V continuously adjustable, high efficiency (92%) of the maximum output current of 3A.
- Conversion efficiency: Up to 92% (the higher the voltage, the higher the efficiency)
- The measured 12V input, 5V output current is 1A load regulation of less than 1%
SKU: Buck-buck converter - Hardware Parts, other ics, Power supply Modules, SMPS
TP4056 – 1A – Li-Ion Lithium Battery charging Module – Micro USB
-27%
Hardware Parts, other ics, Power supply Modules, SMPSTP4056 – 1A – Li-Ion Lithium Battery charging Module – Micro USB
TP4056 – 1A – Lithium Battery charging Module – Micro USB
* Product Images are shown for illustrative purposes only and may differ from actual product.
SKU: TP4056 - 1A - Li-Ion Lithium Battery charging Module - Micro USB
