No products in the cart.
Accessories
Showing 31–45 of 62 results
- Accessories, Accessories, Wires & Cables
Jumper Wires Male-male , male-female ,female -female -20 Pcs each
-10%
Accessories, Accessories, Wires & CablesJumper Wires Male-male , male-female ,female -female -20 Pcs each
Jumper Wires to connect differernt components on breadboard . Best Quality Copper Plated High Conductivity
Package includes :
20 Pcs Male -Male Jumper Wires
20 Pcs Male -Female Jumper Wires
20 Pcs Female -Female Jumper Wires
SKU: Jumper Wires Male-male , male-female ,female -female -20 Pcs each - Accessories, Accessories, Wires & Cables
Jumper Wires Female To Female/Breadboard Jumper Wires (FF 40)
-23%
Accessories, Accessories, Wires & CablesJumper Wires Female To Female/Breadboard Jumper Wires (FF 40)
- 40 pc female to female jumper wire ;Each cable length about 20cm or 8-inch
- The male ends meant for insertion into standard 0.1 inch (2.54mm) female sockets and the female ends are meant for insertion onto standard 0.1 inch (2.54mm) male headers
- Suitable for Arduino breadboard kit project, PCB project, pc motherboard, etc
- aptechdeals.com Building Kits
- Through the pin connection, without welding, fit for fast circuit test.
SKU: Jumper Wires Female To Female/Breadboard Jumper Wires (FF 40) - Accessories, Accessories, Modules, Motor Driver, Shields
L293D IC BASED MOTOR DRIVER MODULE compatible with Arduino
-30%
Accessories, Accessories, Modules, Motor Driver, ShieldsL293D IC BASED MOTOR DRIVER MODULE compatible with Arduino
- CAN CONTROL DC GEARED MOTOR
- CAN BE EASILY INTERFACED WITH MICRO-CONTROLLER USING HEADER PINS
- COMPATIBLE WITH ARDUINO, RASPBERRY PI, ARM, AVR, PIC, 8051, etc – Can provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V.
- With Terminal Blocks for connecting motors & power supply and Berg Sticks for control signals from microcontroller
- Can control 2 DC Motors, their direction using control lines and their speed using PWM.
SKU: L293D IC BASED MOTOR DRIVER MODULE compatible with Arduino - Accessories, Modules, Motor Driver, Other Module, Shields
L298 Motor Driver Module Dual H Bridge DC Stepper for Arduino
-40%
Accessories, Modules, Motor Driver, Other Module, ShieldsL298 Motor Driver Module Dual H Bridge DC Stepper for Arduino
- A great set of tools to develop ESP8266,CP2102 chip, Built-in Micro-USB,with flash and reset switches
- ESP8266 has IO pin leads directly download without resetting
- USB: Micro USB port for power, programming and debugging
SKU: L298 Motor Driver Module Dual H Bridge DC Stepper for Arduino - Accessories, Accessories, Arduino, LCD, LED, Modules, Other Module, PROGRAMMABLE BOARDS
LCD 16X2 Yellow Backlight Alphanumeric Display For 8051,AVR,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green)
-40%
Accessories, Accessories, Arduino, LCD, LED, Modules, Other Module, PROGRAMMABLE BOARDSLCD 16X2 Yellow Backlight Alphanumeric Display For 8051,AVR,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green)
- A 16×2 LCD means it can display 16 characters per line and there are 2 such lines.
- In this LCD each character is displayed in 5×7 pixel matrix.JHD162A
- Black text on green background
- Connection port is 0.1″ pitch, single row for easy breadboarding and wiring
- Pins are documented on the back of the LCD to assist in wiring it up
SKU: LCD 16X2 Yellow Backlight Alphanumeric Display For 8051,AVR,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green) - Accessories, Accessories, Sensors
LM35DZ Temperature Sensor Precision Celsius w/ Analog Output
Features
- Calibrated Directly in Celsius (Centigrade)
- Linear + 10-mV/°C Scale Factor
- 0.5°C Ensured Accuracy (at 25°C)
- Rated for Full 0°C to 100°C Range
- Suitable for Remote Applications
- Low-Cost Due to Wafer-Level Trimming
- Operates from 4 V to 30 V DC
- Less than 60-μA Current Drain
- Low Self-Heating, 0.08°C in Still Air
- Non-Linearity Only ±¼°C Typical
- Low-Impedance Output, 0.1 Ω for 1-mA Load
SKU: LM35DZ Temperature Sensor Precision Celsius w/ Analog Output - Accessories, Accessories, Other Module
Micro SD Card Slot Module, SPI Serial Peripheral Interface (TF card compatible)
-25%
Accessories, Accessories, Other ModuleMicro SD Card Slot Module, SPI Serial Peripheral Interface (TF card compatible)
Features:
- Supports micro SD card (<=2G), micro SDHC card (<=32G) (high-speed card)
- Level conversion circuit board that can interface level is 5V or 3.3V
- Power supply is 3.3V ~ 5V, 3.3V voltage regulator circuit board
- Communication interface is a standard SPI interface
- 4 M2 screw positioning holes for easy installation
- Size: 4.1 x 2.4cm
SKU: Micro SD Card Slot Module, SPI Serial Peripheral Interface (TF card compatible) - Accessories, Sensors
MPU6050 – Triple Axis Gyro Accelerometer Module
Features:-
- Uses the popular MPU6050 IC
- MPU6050 contains a 3 axis Accelerometer and Gyroscope in a single package and simplifies design and usage. It also reduces cross axis alignment issues unlike other sensors with separate accelerometer and gyroscope ICs
- Digital I2C interface to read the output of the sensor
- Input Voltage: 2.3 – 3.4V
- Selectable Solder Jumpers on CLK, FSYNC and AD0
- Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
- Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
- Embedded algorithms for run-time bias and compass calibration. No user intervention required
- Digital-output temperature sensor
SKU: MPU6050 - Triple Axis Gyro Accelerometer Module
