No products in the cart.
Arduino
Showing 46–60 of 75 results
- Accessories, Accessories, Modules, Motor Driver, Shields
L293D IC BASED MOTOR DRIVER MODULE compatible with Arduino
-30%
Accessories, Accessories, Modules, Motor Driver, ShieldsL293D IC BASED MOTOR DRIVER MODULE compatible with Arduino
- CAN CONTROL DC GEARED MOTOR
- CAN BE EASILY INTERFACED WITH MICRO-CONTROLLER USING HEADER PINS
- COMPATIBLE WITH ARDUINO, RASPBERRY PI, ARM, AVR, PIC, 8051, etc – Can provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V.
- With Terminal Blocks for connecting motors & power supply and Berg Sticks for control signals from microcontroller
- Can control 2 DC Motors, their direction using control lines and their speed using PWM.
SKU: L293D IC BASED MOTOR DRIVER MODULE compatible with Arduino - Accessories, Modules, Motor Driver, Other Module, Shields
L298 Motor Driver Module Dual H Bridge DC Stepper for Arduino
-40%
Accessories, Modules, Motor Driver, Other Module, ShieldsL298 Motor Driver Module Dual H Bridge DC Stepper for Arduino
- A great set of tools to develop ESP8266,CP2102 chip, Built-in Micro-USB,with flash and reset switches
- ESP8266 has IO pin leads directly download without resetting
- USB: Micro USB port for power, programming and debugging
SKU: L298 Motor Driver Module Dual H Bridge DC Stepper for Arduino - Accessories, Accessories, Arduino, LCD, LED, Modules, Other Module, PROGRAMMABLE BOARDS
LCD 16X2 Yellow Backlight Alphanumeric Display For 8051,AVR,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green)
-40%
Accessories, Accessories, Arduino, LCD, LED, Modules, Other Module, PROGRAMMABLE BOARDSLCD 16X2 Yellow Backlight Alphanumeric Display For 8051,AVR,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green)
- A 16×2 LCD means it can display 16 characters per line and there are 2 such lines.
- In this LCD each character is displayed in 5×7 pixel matrix.JHD162A
- Black text on green background
- Connection port is 0.1″ pitch, single row for easy breadboarding and wiring
- Pins are documented on the back of the LCD to assist in wiring it up
SKU: LCD 16X2 Yellow Backlight Alphanumeric Display For 8051,AVR,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green) - Arduino, Boards, PROGRAMMABLE BOARDS
Lilypad Arduino 328 Main Board
The LilyPad Arduino Main Board is based on the ATmega328V. It features all digital and analog pins you would find on the Arduino UNO R3 (Digital 0-13 & Analog 0-5). to save space and make the board lighter they have removed the USB-port and USB to TTL chip, there for the Lily pad requires an FTDI to be programmed.
SKU: Lilypad Arduino 328 Main Board - Accessories, Accessories, Sensors
LM35DZ Temperature Sensor Precision Celsius w/ Analog Output
Features
- Calibrated Directly in Celsius (Centigrade)
- Linear + 10-mV/°C Scale Factor
- 0.5°C Ensured Accuracy (at 25°C)
- Rated for Full 0°C to 100°C Range
- Suitable for Remote Applications
- Low-Cost Due to Wafer-Level Trimming
- Operates from 4 V to 30 V DC
- Less than 60-μA Current Drain
- Low Self-Heating, 0.08°C in Still Air
- Non-Linearity Only ±¼°C Typical
- Low-Impedance Output, 0.1 Ω for 1-mA Load
SKU: LM35DZ Temperature Sensor Precision Celsius w/ Analog Output - Accessories, Accessories, Other Module
Micro SD Card Slot Module, SPI Serial Peripheral Interface (TF card compatible)
-25%
Accessories, Accessories, Other ModuleMicro SD Card Slot Module, SPI Serial Peripheral Interface (TF card compatible)
Features:
- Supports micro SD card (<=2G), micro SDHC card (<=32G) (high-speed card)
- Level conversion circuit board that can interface level is 5V or 3.3V
- Power supply is 3.3V ~ 5V, 3.3V voltage regulator circuit board
- Communication interface is a standard SPI interface
- 4 M2 screw positioning holes for easy installation
- Size: 4.1 x 2.4cm
SKU: Micro SD Card Slot Module, SPI Serial Peripheral Interface (TF card compatible) - Accessories, Sensors
MPU6050 – Triple Axis Gyro Accelerometer Module
Features:-
- Uses the popular MPU6050 IC
- MPU6050 contains a 3 axis Accelerometer and Gyroscope in a single package and simplifies design and usage. It also reduces cross axis alignment issues unlike other sensors with separate accelerometer and gyroscope ICs
- Digital I2C interface to read the output of the sensor
- Input Voltage: 2.3 – 3.4V
- Selectable Solder Jumpers on CLK, FSYNC and AD0
- Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
- Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
- Embedded algorithms for run-time bias and compass calibration. No user intervention required
- Digital-output temperature sensor
SKU: MPU6050 - Triple Axis Gyro Accelerometer Module - Accessories, Accessories, Other Module, Robot Parts
NEO-6M U-BLOX NEO-6M GPS Positioning Module to Serial TTL
-36%
Accessories, Accessories, Other Module, Robot PartsNEO-6M U-BLOX NEO-6M GPS Positioning Module to Serial TTL
- Interface: UART interface, with logical level converter, 3.3V-5V interface compatible
- SunRobotics ublox neo-6m gps module (3.3V-5V interface with eeprom and flash)
- Board size: 23mm*40mm
- Antenna: High gain active anttenna and good performance. 25mm*25mm
SKU: NEO-6M U-BLOX NEO-6M GPS Positioning Module to Serial TTL - Boards
NODEMCU LOLiN – ESP8266 Wifi Development Board
Specification of Node-MCU IoT Module :-
It is based on ESP8266, integates GPIO, PWM, IIC, 1-Wire and ADC all in one board.
Power your developement in the fastest way combinating with NodeMCU Firmware!
USB-TTL included, plug&play
10 GPIO, every GPIO can be PWM, I2C, 1-wire
Features of Node-MCU IoT Module:-
Open source IoT Platform
Easily Programmable
Low cost & Simple to Implement
WI-FI enabled
SKU: NODEMCU LOLiN - ESP8266 Wifi Development Board - Boards
NodeMcu WiFi Development Board – ESP8266
Specifications and Features of Node MCU:-
- 11 b/g/n Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- CP2102 Serial / USB Chip
- +19.5dBm output power in 802.11b mode
- 4MB Flash Memory
- Integrated low power 32-bit CPU
- SDIO 1.1 / 2.0, SPI, UART
- Dimensions – 49 x 24.5 x 13mm
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- On board USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has on board 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
- Voltage Regulator / Converter, excellent DC to DC conversion, super efficient
SKU: NodeMcu WiFi Development Board - ESP8266 - Accessories, Accessories, Sensors
NRF24L01 + 2.4GHZ Wireless Transceiver module for Arduino
1 low working voltage: 1.9 ~ 3.6V low voltage operation 2 high speed: 2Mbps, due to the transmission time is very short, greatly reducing the collision phenomenon in the wireless transmission (air transmission rate software set 1Mbps or 2Mbps) 3 multi frequency: 125 frequency points, meet the multipoint communication and frequency hopping communication needs 4 tiny: built-in 2.4GHz antenna, small volume, 15x29mm (including antenna) 5 low power: when working in answer mode communication, air transport and starting time of fast, greatly reducing current consumption. 6 low cost: the NRF24L01 integrates all the relevant RF agreements and high-speed signal processing, such as: automatic retransmission of lost packets and automatically generate a response signal, SPI interface, NRF24L01 can use the hardware SPI port connection or by SCM I/O port simulation, internal FIFO and all kinds of high and low speed microprocessor interface, easy to use low cost microcontroller.
SKU: sensor_nrf24l01
