No products in the cart.
Accessories
Showing 31–45 of 61 results
- Accessories, Accessories, Wires & Cables
Jumper Wires Female To Female/Breadboard Jumper Wires (FF 40)
-23%
Accessories, Accessories, Wires & CablesJumper Wires Female To Female/Breadboard Jumper Wires (FF 40)
- 40 pc female to female jumper wire ;Each cable length about 20cm or 8-inch
- The male ends meant for insertion into standard 0.1 inch (2.54mm) female sockets and the female ends are meant for insertion onto standard 0.1 inch (2.54mm) male headers
- Suitable for Arduino breadboard kit project, PCB project, pc motherboard, etc
- aptechdeals.com Building Kits
- Through the pin connection, without welding, fit for fast circuit test.
SKU: Jumper Wires Female To Female/Breadboard Jumper Wires (FF 40) - Accessories, Accessories, Modules, Motor Driver, Shields
L293D IC BASED MOTOR DRIVER MODULE compatible with Arduino
-30%
Accessories, Accessories, Modules, Motor Driver, ShieldsL293D IC BASED MOTOR DRIVER MODULE compatible with Arduino
- CAN CONTROL DC GEARED MOTOR
- CAN BE EASILY INTERFACED WITH MICRO-CONTROLLER USING HEADER PINS
- COMPATIBLE WITH ARDUINO, RASPBERRY PI, ARM, AVR, PIC, 8051, etc – Can provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V.
- With Terminal Blocks for connecting motors & power supply and Berg Sticks for control signals from microcontroller
- Can control 2 DC Motors, their direction using control lines and their speed using PWM.
SKU: L293D IC BASED MOTOR DRIVER MODULE compatible with Arduino - Accessories, Accessories, Arduino, LCD, LED, Modules, Other Module, PROGRAMMABLE BOARDS
LCD 16X2 Yellow Backlight Alphanumeric Display For 8051,AVR,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green)
-40%
Accessories, Accessories, Arduino, LCD, LED, Modules, Other Module, PROGRAMMABLE BOARDSLCD 16X2 Yellow Backlight Alphanumeric Display For 8051,AVR,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green)
- A 16×2 LCD means it can display 16 characters per line and there are 2 such lines.
- In this LCD each character is displayed in 5×7 pixel matrix.JHD162A
- Black text on green background
- Connection port is 0.1″ pitch, single row for easy breadboarding and wiring
- Pins are documented on the back of the LCD to assist in wiring it up
SKU: LCD 16X2 Yellow Backlight Alphanumeric Display For 8051,AVR,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green) - Accessories, Accessories, Sensors
LM35DZ Temperature Sensor Precision Celsius w/ Analog Output
Features
- Calibrated Directly in Celsius (Centigrade)
- Linear + 10-mV/°C Scale Factor
- 0.5°C Ensured Accuracy (at 25°C)
- Rated for Full 0°C to 100°C Range
- Suitable for Remote Applications
- Low-Cost Due to Wafer-Level Trimming
- Operates from 4 V to 30 V DC
- Less than 60-μA Current Drain
- Low Self-Heating, 0.08°C in Still Air
- Non-Linearity Only ±¼°C Typical
- Low-Impedance Output, 0.1 Ω for 1-mA Load
SKU: LM35DZ Temperature Sensor Precision Celsius w/ Analog Output - Accessories, Accessories, Other Module
Micro SD Card Slot Module, SPI Serial Peripheral Interface (TF card compatible)
-25%
Accessories, Accessories, Other ModuleMicro SD Card Slot Module, SPI Serial Peripheral Interface (TF card compatible)
Features:
- Supports micro SD card (<=2G), micro SDHC card (<=32G) (high-speed card)
- Level conversion circuit board that can interface level is 5V or 3.3V
- Power supply is 3.3V ~ 5V, 3.3V voltage regulator circuit board
- Communication interface is a standard SPI interface
- 4 M2 screw positioning holes for easy installation
- Size: 4.1 x 2.4cm
SKU: Micro SD Card Slot Module, SPI Serial Peripheral Interface (TF card compatible) - Accessories, Accessories, Other Module, Robot Parts
NEO-6M U-BLOX NEO-6M GPS Positioning Module to Serial TTL
-36%
Accessories, Accessories, Other Module, Robot PartsNEO-6M U-BLOX NEO-6M GPS Positioning Module to Serial TTL
- Interface: UART interface, with logical level converter, 3.3V-5V interface compatible
- SunRobotics ublox neo-6m gps module (3.3V-5V interface with eeprom and flash)
- Board size: 23mm*40mm
- Antenna: High gain active anttenna and good performance. 25mm*25mm
SKU: NEO-6M U-BLOX NEO-6M GPS Positioning Module to Serial TTL - Accessories, Accessories, Sensors
NRF24L01 + 2.4GHZ Wireless Transceiver module for Arduino
1 low working voltage: 1.9 ~ 3.6V low voltage operation 2 high speed: 2Mbps, due to the transmission time is very short, greatly reducing the collision phenomenon in the wireless transmission (air transmission rate software set 1Mbps or 2Mbps) 3 multi frequency: 125 frequency points, meet the multipoint communication and frequency hopping communication needs 4 tiny: built-in 2.4GHz antenna, small volume, 15x29mm (including antenna) 5 low power: when working in answer mode communication, air transport and starting time of fast, greatly reducing current consumption. 6 low cost: the NRF24L01 integrates all the relevant RF agreements and high-speed signal processing, such as: automatic retransmission of lost packets and automatically generate a response signal, SPI interface, NRF24L01 can use the hardware SPI port connection or by SCM I/O port simulation, internal FIFO and all kinds of high and low speed microprocessor interface, easy to use low cost microcontroller.
SKU: sensor_nrf24l01 - Accessories, Accessories, Sensors
NTC Themistor Module LM393 (Temperature up to 80 Degree Celsius)
-25%
Accessories, Accessories, SensorsNTC Themistor Module LM393 (Temperature up to 80 Degree Celsius)
Features :
- NTC Thermistor sensor
- LM393 voltage comparator
- Mounting hole for easy installation
- Adjustable threshold via potentiometer
Specification :
- Operating Voltage: 3.3V DC to 5V DC
- Output Current: 15mA
- Output Type: Digital (HIGH OR LOW)
- PCB Size: 32 x 14mm
- Temperature Range: 20°C – 80°C
Package Include:
- 1x LM393 Thermal Sensor Module
SKU: NTC Themistor Module LM393 (Temperature up to 80 Degree Celsius) - Accessories
Official Raspberry Pi Zero W Wireless Casing
Official Raspberry Pi Zero W Wireless Casing can support both Pi Zero W and Pi Zero V1.3 Boards.
It provides integrated Camera Support.
Do Checkout Raspberry Pi Zero W buy in india at best price.
Includes three interchangeable lids
Integrated camera support
Includes Pi Zero camera cable
* Product Images are shown for illustrative purposes only and may differ from actual product.
SKU: Official Raspberry Pi Zero W Wireless Casing - Accessories, Accessories, Sensors
Photo-resistor LDR Light Sensor Module (Light Dependent Resistor)
-27%
Accessories, Accessories, SensorsPhoto-resistor LDR Light Sensor Module (Light Dependent Resistor)
Features:
- Able to detect ambient brightness and light intensity
- Adjustable sensitivity (via blue digital potentiometer adjustment)
- Operating voltage 3.3V-5V
- Digital switching outputs (0 and 1) -D0
- With fixed bolt hole for easy installation
- Small board PCB size: 3cm * 1.6cm
- Power indicator (Red) and the digital switch output indicator (Green)
- Features wide range voltage comparator LM393
SKU: Photo-resistor LDR Light Sensor Module (Light Dependent Resistor)
