No products in the cart.
Robotics
Showing 31–45 of 73 results
- Accessories, Accessories, Sensors
IR Sensor Module
Features of IR Sensor Module:-
- When the module detects obstacles in front of the signal, the circuit board green indicator light level, while the OUT port continuous output low-level signals, the module detects a distance of 2 ~ 10cm, detection angle 35 °, the detection distance can be potential adjustment with adjustment potentiometer clockwise, the increase in detection distance; counterclockwise adjustment potentiometer, the detection distance decreased.
- the sensor active infrared reflection detection, target reflectivity and shape of the detection distance of the key. The black minimum detection range, white maximum; small area object distance is small, a large area from the large.
- The sensor module output port OUT can be directly connected with the microcontroller IO port can also be driven directly to a 5V relay; Connection: VCC-VCC; GND-GND; OUT-IO.
- The comparator using LM393, stable.
- 3-5V DC power supply module can be used. When the power is turned on, the red power LED is lit.
- With the screw holes of 3mm, easy to install.
- Board size: 3.1CM * 1.5CM.
- Each module in the delivery has threshold comparator voltage adjustable via potentiometer, special circumstances, please do not adjust the potentiometer.
SKU: IR Sensor Module - Driver & Interface ICs, Motor Driver
L293D DIP Push-Pull Four-Channel Motor Driver IC -1Pc
- Wide Supply-Voltage Range: 4.5 V to 36 V
- Separate Input-Logic Supply
- Output Current 1 A Per Channel (600 mA for L293D)
- Peak Output Current 2 A Per Channel (1.2 A for 293D)
- Package Include 2 x L293D IC
SKU: L293D DIP Push-Pull Four-Channel Motor Driver IC -1Pc - Accessories, Accessories, Modules, Motor Driver, Shields
L293D IC BASED MOTOR DRIVER MODULE compatible with Arduino
-30%
Accessories, Accessories, Modules, Motor Driver, ShieldsL293D IC BASED MOTOR DRIVER MODULE compatible with Arduino
- CAN CONTROL DC GEARED MOTOR
- CAN BE EASILY INTERFACED WITH MICRO-CONTROLLER USING HEADER PINS
- COMPATIBLE WITH ARDUINO, RASPBERRY PI, ARM, AVR, PIC, 8051, etc – Can provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V.
- With Terminal Blocks for connecting motors & power supply and Berg Sticks for control signals from microcontroller
- Can control 2 DC Motors, their direction using control lines and their speed using PWM.
SKU: L293D IC BASED MOTOR DRIVER MODULE compatible with Arduino - Accessories, Modules, Motor Driver, Other Module, Shields
L298 Motor Driver Module Dual H Bridge DC Stepper for Arduino
-40%
Accessories, Modules, Motor Driver, Other Module, ShieldsL298 Motor Driver Module Dual H Bridge DC Stepper for Arduino
- A great set of tools to develop ESP8266,CP2102 chip, Built-in Micro-USB,with flash and reset switches
- ESP8266 has IO pin leads directly download without resetting
- USB: Micro USB port for power, programming and debugging
SKU: L298 Motor Driver Module Dual H Bridge DC Stepper for Arduino - Accessories, Accessories, Arduino, LCD, LED, Modules, Other Module, PROGRAMMABLE BOARDS
LCD 16X2 Yellow Backlight Alphanumeric Display For 8051,AVR,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green)
-40%
Accessories, Accessories, Arduino, LCD, LED, Modules, Other Module, PROGRAMMABLE BOARDSLCD 16X2 Yellow Backlight Alphanumeric Display For 8051,AVR,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green)
- A 16×2 LCD means it can display 16 characters per line and there are 2 such lines.
- In this LCD each character is displayed in 5×7 pixel matrix.JHD162A
- Black text on green background
- Connection port is 0.1″ pitch, single row for easy breadboarding and wiring
- Pins are documented on the back of the LCD to assist in wiring it up
SKU: LCD 16X2 Yellow Backlight Alphanumeric Display For 8051,AVR,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green) - Accessories, Accessories, Sensors
LM35DZ Temperature Sensor Precision Celsius w/ Analog Output
Features
- Calibrated Directly in Celsius (Centigrade)
- Linear + 10-mV/°C Scale Factor
- 0.5°C Ensured Accuracy (at 25°C)
- Rated for Full 0°C to 100°C Range
- Suitable for Remote Applications
- Low-Cost Due to Wafer-Level Trimming
- Operates from 4 V to 30 V DC
- Less than 60-μA Current Drain
- Low Self-Heating, 0.08°C in Still Air
- Non-Linearity Only ±¼°C Typical
- Low-Impedance Output, 0.1 Ω for 1-mA Load
SKU: LM35DZ Temperature Sensor Precision Celsius w/ Analog Output - Servo Motors
MG90S – Metal Gear Servo Motor – 180 Degree Rotation
Specification :-
- Modulation: Analog
- Torque: 4.8V: 30.60 oz-in (2.20 kg-cm)
- 6.0V: 34.70 oz-in (2.50 kg-cm)
- Speed: 4.8V: 0.11 sec/60°
- 6.0V: 0.10 sec/60°
- Weight: 0.49 oz (14.0 g)
- Dimensions: Length:0.91 in (23.1 mm)
- Width: 0.48 in (12.2 mm)
- Height: 1.14 in (29.0 mm)
- Gear Type: Metal
- Rotation/Support: Dual Bearings
- Rotational Range: 180°
- Pulse Cycle: 20 ms
- Pulse Width: 400-2400 µs
SKU: MG90S - Metal Gear Servo Motor - 180 Degree Rotation - Servo Motors
MG995 Metal Gear Servo Motor (180 Degree Rotation)
Specification :-
- Weight : 55g
- Dimension : 40.7 × 19.7 × 42.9 mm
- Operating Speed (4.8V no load): 20sec / 60 deg
- Operating Speed (6.0V no load): 16sec / 60 deg ( no load)
- Stall Torque (4.8V): 10kg/cm
- Stall Torque (6.0V): 12kg/cm
- Operation Voltage : 4.8 – 7.2Volts
- Gear Type: All Metal Gears
- Stable and shock proof double ball bearing design
- Dead band width: 5 µs
- Temperature range: 0 ºC – 55 ºC.
- Control System: Analog
- Operating Angle: 120degree
- Required Pulse: 900us-2100us
SKU: MG995 Metal Gear Servo Motor (180 Degree Rotation) - Accessories, Accessories, Other Module
Micro SD Card Slot Module, SPI Serial Peripheral Interface (TF card compatible)
-25%
Accessories, Accessories, Other ModuleMicro SD Card Slot Module, SPI Serial Peripheral Interface (TF card compatible)
Features:
- Supports micro SD card (<=2G), micro SDHC card (<=32G) (high-speed card)
- Level conversion circuit board that can interface level is 5V or 3.3V
- Power supply is 3.3V ~ 5V, 3.3V voltage regulator circuit board
- Communication interface is a standard SPI interface
- 4 M2 screw positioning holes for easy installation
- Size: 4.1 x 2.4cm
SKU: Micro SD Card Slot Module, SPI Serial Peripheral Interface (TF card compatible) - Accessories, Sensors
MPU6050 – Triple Axis Gyro Accelerometer Module
Features:-
- Uses the popular MPU6050 IC
- MPU6050 contains a 3 axis Accelerometer and Gyroscope in a single package and simplifies design and usage. It also reduces cross axis alignment issues unlike other sensors with separate accelerometer and gyroscope ICs
- Digital I2C interface to read the output of the sensor
- Input Voltage: 2.3 – 3.4V
- Selectable Solder Jumpers on CLK, FSYNC and AD0
- Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
- Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
- Embedded algorithms for run-time bias and compass calibration. No user intervention required
- Digital-output temperature sensor
SKU: MPU6050 - Triple Axis Gyro Accelerometer Module - Sensors
MQ135 MQ-135 Air Quality Sensor Hazardous Gas Detection Module For Arduino
Input voltage: DC5V power (current): 150mA
Analog output with increasing concentration, the higher the concentration, the higher the voltage.
A hazardous gas detection apparatus for the family, the environment. Suitable for ammonia, aromatic compounds, sulfur, benzene vapor, smoke and other gases harmful gas detection. Gas-sensitive element test concentration range: 10 to 1000ppm
TTL output valid signal is low level, (output low signal light, which can be accessed microcontroller IO port).
Size:36mm X24mm X25mm(L * W * H)SKU: sensor_MQ135
