SENSORS AND MODULES
Showing 31–45 of 60 results
- Accessories, Accessories, Arduino, LCD, LED, Modules, Other Module, PROGRAMMABLE BOARDS
LCD 16X2 Yellow Backlight Alphanumeric Display For 8051,AVR,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green)
-40%Accessories, Accessories, Arduino, LCD, LED, Modules, Other Module, PROGRAMMABLE BOARDSLCD 16X2 Yellow Backlight Alphanumeric Display For 8051,AVR,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green)
- A 16×2 LCD means it can display 16 characters per line and there are 2 such lines.
- In this LCD each character is displayed in 5×7 pixel matrix.JHD162A
- Black text on green background
- Connection port is 0.1″ pitch, single row for easy breadboarding and wiring
- Pins are documented on the back of the LCD to assist in wiring it up
SKU: LCD 16X2 Yellow Backlight Alphanumeric Display For 8051,AVR,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green) - Accessories, Accessories, Sensors
LM35DZ Temperature Sensor Precision Celsius w/ Analog Output
Features
- Calibrated Directly in Celsius (Centigrade)
- Linear + 10-mV/°C Scale Factor
- 0.5°C Ensured Accuracy (at 25°C)
- Rated for Full 0°C to 100°C Range
- Suitable for Remote Applications
- Low-Cost Due to Wafer-Level Trimming
- Operates from 4 V to 30 V DC
- Less than 60-μA Current Drain
- Low Self-Heating, 0.08°C in Still Air
- Non-Linearity Only ±¼°C Typical
- Low-Impedance Output, 0.1 Ω for 1-mA Load
SKU: LM35DZ Temperature Sensor Precision Celsius w/ Analog Output - Accessories, Accessories, Other Module
Micro SD Card Slot Module, SPI Serial Peripheral Interface (TF card compatible)
-25%Accessories, Accessories, Other ModuleMicro SD Card Slot Module, SPI Serial Peripheral Interface (TF card compatible)
Features:
- Supports micro SD card (<=2G), micro SDHC card (<=32G) (high-speed card)
- Level conversion circuit board that can interface level is 5V or 3.3V
- Power supply is 3.3V ~ 5V, 3.3V voltage regulator circuit board
- Communication interface is a standard SPI interface
- 4 M2 screw positioning holes for easy installation
- Size: 4.1 x 2.4cm
SKU: Micro SD Card Slot Module, SPI Serial Peripheral Interface (TF card compatible) - Accessories, Sensors
MPU6050 – Triple Axis Gyro Accelerometer Module
Features:-
- Uses the popular MPU6050 IC
- MPU6050 contains a 3 axis Accelerometer and Gyroscope in a single package and simplifies design and usage. It also reduces cross axis alignment issues unlike other sensors with separate accelerometer and gyroscope ICs
- Digital I2C interface to read the output of the sensor
- Input Voltage: 2.3 – 3.4V
- Selectable Solder Jumpers on CLK, FSYNC and AD0
- Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
- Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
- Embedded algorithms for run-time bias and compass calibration. No user intervention required
- Digital-output temperature sensor
SKU: MPU6050 - Triple Axis Gyro Accelerometer Module - Sensors
MQ135 MQ-135 Air Quality Sensor Hazardous Gas Detection Module For Arduino
Input voltage: DC5V power (current): 150mA
Analog output with increasing concentration, the higher the concentration, the higher the voltage.
A hazardous gas detection apparatus for the family, the environment. Suitable for ammonia, aromatic compounds, sulfur, benzene vapor, smoke and other gases harmful gas detection. Gas-sensitive element test concentration range: 10 to 1000ppm
TTL output valid signal is low level, (output low signal light, which can be accessed microcontroller IO port).
Size:36mm X24mm X25mm(L * W * H)SKU: sensor_MQ135 - Sensors
MQ2 gas sensor Arduino Compatible ,Methane, Butane, LPG, Smoke Sensor
Analog gas sensor MQ2
Used in gas leakage like smoke methane and liquefied flammable gas
Wide detecting scope, fast response and high sensitivity
Simple drive circuit, stable and long life
Detecting LPG, i-butane, propane, methane, alcohol, hydrogen and smokeSKU: sensor_MQ2 - Accessories, Accessories, Other Module, Robot Parts
NEO-6M U-BLOX NEO-6M GPS Positioning Module to Serial TTL
-36%Accessories, Accessories, Other Module, Robot PartsNEO-6M U-BLOX NEO-6M GPS Positioning Module to Serial TTL
- Interface: UART interface, with logical level converter, 3.3V-5V interface compatible
- SunRobotics ublox neo-6m gps module (3.3V-5V interface with eeprom and flash)
- Board size: 23mm*40mm
- Antenna: High gain active anttenna and good performance. 25mm*25mm
SKU: NEO-6M U-BLOX NEO-6M GPS Positioning Module to Serial TTL - Accessories, Accessories, Sensors
NRF24L01 + 2.4GHZ Wireless Transceiver module for Arduino
1 low working voltage: 1.9 ~ 3.6V low voltage operation 2 high speed: 2Mbps, due to the transmission time is very short, greatly reducing the collision phenomenon in the wireless transmission (air transmission rate software set 1Mbps or 2Mbps) 3 multi frequency: 125 frequency points, meet the multipoint communication and frequency hopping communication needs 4 tiny: built-in 2.4GHz antenna, small volume, 15x29mm (including antenna) 5 low power: when working in answer mode communication, air transport and starting time of fast, greatly reducing current consumption. 6 low cost: the NRF24L01 integrates all the relevant RF agreements and high-speed signal processing, such as: automatic retransmission of lost packets and automatically generate a response signal, SPI interface, NRF24L01 can use the hardware SPI port connection or by SCM I/O port simulation, internal FIFO and all kinds of high and low speed microprocessor interface, easy to use low cost microcontroller.
SKU: sensor_nrf24l01 - Accessories, Accessories, Sensors
NTC Themistor Module LM393 (Temperature up to 80 Degree Celsius)
-25%Accessories, Accessories, SensorsNTC Themistor Module LM393 (Temperature up to 80 Degree Celsius)
Features :
- NTC Thermistor sensor
- LM393 voltage comparator
- Mounting hole for easy installation
- Adjustable threshold via potentiometer
Specification :
- Operating Voltage: 3.3V DC to 5V DC
- Output Current: 15mA
- Output Type: Digital (HIGH OR LOW)
- PCB Size: 32 x 14mm
- Temperature Range: 20°C – 80°C
Package Include:
- 1x LM393 Thermal Sensor Module
SKU: NTC Themistor Module LM393 (Temperature up to 80 Degree Celsius) - Accessories, Accessories, Sensors
Photo-resistor LDR Light Sensor Module (Light Dependent Resistor)
-27%Accessories, Accessories, SensorsPhoto-resistor LDR Light Sensor Module (Light Dependent Resistor)
Features:
- Able to detect ambient brightness and light intensity
- Adjustable sensitivity (via blue digital potentiometer adjustment)
- Operating voltage 3.3V-5V
- Digital switching outputs (0 and 1) -D0
- With fixed bolt hole for easy installation
- Small board PCB size: 3cm * 1.6cm
- Power indicator (Red) and the digital switch output indicator (Green)
- Features wide range voltage comparator LM393
SKU: Photo-resistor LDR Light Sensor Module (Light Dependent Resistor) - Accessories, Accessories, Sensors
PIR Motion Sensor Module HC-SR501 w/ Adjustable Delay Time & Output Signal – 1Pc
-24%Accessories, Accessories, SensorsPIR Motion Sensor Module HC-SR501 w/ Adjustable Delay Time & Output Signal – 1Pc
Key Features
- Detection range up to 20 feet
- Single bit output
- Jumper selection single or continuous trigger output mode
- 3-pin SIP header ready for breadboard or through-hole project
Specifications
- Operating voltage: DC 5 – 12V
- Static power consumption: 65 mA
- Output Signal: 3V TTL
- Detection Distance: Up to 6 meter (Adjustable)
- Sensing Range: Less than 120° degree angle, 6 meters
- Delay Time: 5 – 200s (Adjustable)
- Adjustable Trigger: L: non repeatable trigger – H: repeatable trigger
- Operating Temperature: -15 to +70°C
- Dimensions: 32 x 24mm, screw hole distance 28mm
SKU: PIR Motion Sensor Module HC-SR501 w/ Adjustable Delay Time & Output Signal - 1Pc