No products in the cart.
-20%
Operational Amplifier ICs Compare
4558 LM4558 Low Noise Dual Op-amp IC (Pack of 2 Pcs)
- Its 4558 IC
- Pack of 2 Pcs
- Low Noise Dual Op-amp
Availability:
5 in stock
₹79.00 ₹99.00
5 in stock
- Its 4558 IC
- Pack of 2 Pcs
- Low Noise Dual Op-amp
Add a review
You must be logged in to post a review Log In
Related products
- PROGRAMMABLE BOARDS, Accessories, Modules, Shields, Development Board, Other Module
AESW5100 Ethernet Shield W5100 for Arduino UNO Mega 2560 1280 328
-29%
PROGRAMMABLE BOARDS, Accessories, Modules, Shields, Development Board, Other ModuleAESW5100 Ethernet Shield W5100 for Arduino UNO Mega 2560 1280 328
- Based on w5100 ethernet controller
- Supports all major arduino board
- Supported directly by arduino libraries
- Micro sd card can be used with this shield
SKU: AESW5100 Ethernet Shield W5100 for Arduino UNO Mega 2560 1280 328 - PROGRAMMABLE BOARDS, Arduino, Boards
Arduino Mega 2560 R3 Board with USB Cable
Specifications:-
- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 256 KB of which 8 KB used by bootloader
- SRAM: 8 KB
- EEPROM: 4 KB
- Clock Speed: 16 MHz
- USB Host Chip: MAX3421E
- Length:101.98mm/4.01in
- Width:53.63mm/2.11in
- Height:15.29mm/0.60in
SKU: Arduino Mega 2560 R3 Board with USB Cable - PROGRAMMABLE BOARDS, Arduino, Boards
Lilypad Arduino 328 Main Board
The LilyPad Arduino Main Board is based on the ATmega328V. It features all digital and analog pins you would find on the Arduino UNO R3 (Digital 0-13 & Analog 0-5). to save space and make the board lighter they have removed the USB-port and USB to TTL chip, there for the Lily pad requires an FTDI to be programmed.
SKU: Lilypad Arduino 328 Main Board - Accessories, Sensors
MPU6050 – Triple Axis Gyro Accelerometer Module
Features:-
- Uses the popular MPU6050 IC
- MPU6050 contains a 3 axis Accelerometer and Gyroscope in a single package and simplifies design and usage. It also reduces cross axis alignment issues unlike other sensors with separate accelerometer and gyroscope ICs
- Digital I2C interface to read the output of the sensor
- Input Voltage: 2.3 – 3.4V
- Selectable Solder Jumpers on CLK, FSYNC and AD0
- Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
- Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
- Embedded algorithms for run-time bias and compass calibration. No user intervention required
- Digital-output temperature sensor
SKU: MPU6050 - Triple Axis Gyro Accelerometer Module - 40XX ICs
CD4026 4026 CMOS COUNTERS/DIVIDERS DIP16 – 2 Pcs
CD4026 IC – Decade Counter/Divider IC
Counter dec.(10) . With decoded 7-segment outputs (acc. cathode )
Encapsulation : DIP
* Product Images are shown for illustrative purposes only and may differ from actual product.
SKU: CD4026 4026 CMOS COUNTERS/DIVIDERS DIP16 - 2 Pcs
Reviews
There are no reviews yet