No products in the cart.
-30%
Accessories, Patch Cord Compare
CAT 5 Ethernet – LAN Cable – High Speed – 3m / 1Pc
High Speed CAT 5 Ethernet – LAN Cable can be used with Raspberry Pi or any Laptop or PC having an RJ45 Jack
Copper ,LD Wire ,
Speed : 10/100 Mbps
Length – 3m
Availability:
16 in stock
₹69.00 ₹99.00
16 in stock
High Speed CAT 5 Ethernet – LAN Cable can be used with Raspberry Pi or any Laptop or PC having an RJ45 Jack
Copper ,LD Wire ,
Speed : 10/100 Mbps
Length – 3m
* Product Images are shown for illustrative purposes only and may differ from actual product.
Add a review
You must be logged in to post a review Log In
Related products
- PROGRAMMABLE BOARDS, Arduino, Boards
Arduino Mega 2560 R3 Board with USB Cable
Specifications:-
- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 256 KB of which 8 KB used by bootloader
- SRAM: 8 KB
- EEPROM: 4 KB
- Clock Speed: 16 MHz
- USB Host Chip: MAX3421E
- Length:101.98mm/4.01in
- Width:53.63mm/2.11in
- Height:15.29mm/0.60in
SKU: Arduino Mega 2560 R3 Board with USB Cable - PROGRAMMABLE BOARDS, Arduino, Boards
Arduino UNO R3 SMD Atmega328P Board – Clone Compatible Model
-11%
PROGRAMMABLE BOARDS, Arduino, BoardsArduino UNO R3 SMD Atmega328P Board – Clone Compatible Model
Specifications:-
Microcontroller : ATmega328 SMD.
Operating Voltage : 5V.
Supply Voltage recommended : Â 7-12V DC.
Digital I/O Pins : 14 (of which 6 provide PWM output).
Analog Input Pins : 6.
DC Current per I/O Pin : 40 mA.
DC Current for 3.3V Pin : 50 mA.
Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader.
SRAM : 2 KB (ATmega328).
EEPROM : 1 KB (ATmega328).
Clock Speed : 16 MHz.
SKU: Arduino UNO R3 SMD Atmega328P Board - Clone Compatible Model - Accessories, Modules, Shields, Accessories, Motor Driver
L293D IC BASED MOTOR DRIVER MODULE compatible with Arduino
-30%
Accessories, Modules, Shields, Accessories, Motor DriverL293D IC BASED MOTOR DRIVER MODULE compatible with Arduino
- CAN CONTROL DC GEARED MOTOR
- CAN BE EASILY INTERFACED WITH MICRO-CONTROLLER USING HEADER PINS
- COMPATIBLE WITH ARDUINO, RASPBERRY PI, ARM, AVR, PIC, 8051, etc – Can provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V.
- With Terminal Blocks for connecting motors & power supply and Berg Sticks for control signals from microcontroller
- Can control 2 DC Motors, their direction using control lines and their speed using PWM.
SKU: L293D IC BASED MOTOR DRIVER MODULE compatible with Arduino - Accessories, Sensors
MPU6050 – Triple Axis Gyro Accelerometer Module
Features:-
- Uses the popular MPU6050 IC
- MPU6050 contains a 3 axis Accelerometer and Gyroscope in a single package and simplifies design and usage. It also reduces cross axis alignment issues unlike other sensors with separate accelerometer and gyroscope ICs
- Digital I2C interface to read the output of the sensor
- Input Voltage: 2.3 – 3.4V
- Selectable Solder Jumpers on CLK, FSYNC and AD0
- Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
- Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
- Embedded algorithms for run-time bias and compass calibration. No user intervention required
- Digital-output temperature sensor
SKU: MPU6050 - Triple Axis Gyro Accelerometer Module
Reviews
There are no reviews yet