No products in the cart.
-23%
Boards, Shields Compare
GPS Module For arduino
GPS Module SKG13 …
Easily Compatible with Arduino.
Best quality SMA antenna.
Best to make your own GPS Tracker System
₹1,300.00 ₹1,699.00
GPS Module For Arduino
Easily Compatible with Arduino.
Best quality SMA antenna.
Best to make your own GPS Tracker System
| Weight | 0.2 kg |
|---|---|
| Dimensions | 10 × 10 × 10 cm |
Add a review
You must be logged in to post a review Log In
Related products
- USB CABLE & PC peripherals, Accessories, Accessories
USB 2.0 A to Mini 5 pin B Cable for External HDDS/Camera/Card Readers/For Arduino nano
-54%
USB CABLE & PC peripherals, Accessories, AccessoriesUSB 2.0 A to Mini 5 pin B Cable for External HDDS/Camera/Card Readers/For Arduino nano
- Make plug-and-play connections with mobile phones, MP3 players, digital cameras and PDAs, External Hard Drives
- Ideal for transferring your pictures from your digital camera to your PC
- Connect a peripheral with a 5-Pin Mini-USB port to an USB Hub or USB port on PC
- Cable Length : 27 cm ,Compatible with USB 1.0, 1.1 and 2.0.
- Sync/charge Mini-USB enabled devices, from your laptop, computer & more
SKU: USB 2.0 A to Mini 5 pin B Cable for External HDDS/Camera/Card Readers/For Arduino nano - PROGRAMMABLE BOARDS, Arduino, Boards
Arduino UNO R3 SMD Atmega328P Board – Clone Compatible Model
-11%
PROGRAMMABLE BOARDS, Arduino, BoardsArduino UNO R3 SMD Atmega328P Board – Clone Compatible Model
Specifications:-
Microcontroller : ATmega328 SMD.
Operating Voltage : 5V.
Supply Voltage recommended : 7-12V DC.
Digital I/O Pins : 14 (of which 6 provide PWM output).
Analog Input Pins : 6.
DC Current per I/O Pin : 40 mA.
DC Current for 3.3V Pin : 50 mA.
Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader.
SRAM : 2 KB (ATmega328).
EEPROM : 1 KB (ATmega328).
Clock Speed : 16 MHz.
SKU: Arduino UNO R3 SMD Atmega328P Board - Clone Compatible Model - PROGRAMMABLE BOARDS, Accessories, Modules, Shields, Development Board, Other Module
AESW5100 Ethernet Shield W5100 for Arduino UNO Mega 2560 1280 328
-29%
PROGRAMMABLE BOARDS, Accessories, Modules, Shields, Development Board, Other ModuleAESW5100 Ethernet Shield W5100 for Arduino UNO Mega 2560 1280 328
- Based on w5100 ethernet controller
- Supports all major arduino board
- Supported directly by arduino libraries
- Micro sd card can be used with this shield
SKU: AESW5100 Ethernet Shield W5100 for Arduino UNO Mega 2560 1280 328 - Accessories, Sensors
MPU6050 – Triple Axis Gyro Accelerometer Module
Features:-
- Uses the popular MPU6050 IC
- MPU6050 contains a 3 axis Accelerometer and Gyroscope in a single package and simplifies design and usage. It also reduces cross axis alignment issues unlike other sensors with separate accelerometer and gyroscope ICs
- Digital I2C interface to read the output of the sensor
- Input Voltage: 2.3 – 3.4V
- Selectable Solder Jumpers on CLK, FSYNC and AD0
- Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
- Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
- Embedded algorithms for run-time bias and compass calibration. No user intervention required
- Digital-output temperature sensor
SKU: MPU6050 - Triple Axis Gyro Accelerometer Module - Boards
NODEMCU LOLiN – ESP8266 Wifi Development Board
Specification of Node-MCU IoT Module :-
It is based on ESP8266, integates GPIO, PWM, IIC, 1-Wire and ADC all in one board.
Power your developement in the fastest way combinating with NodeMCU Firmware!
USB-TTL included, plug&play
10 GPIO, every GPIO can be PWM, I2C, 1-wire
Features of Node-MCU IoT Module:-
Open source IoT Platform
Easily Programmable
Low cost & Simple to Implement
WI-FI enabled
SKU: NODEMCU LOLiN - ESP8266 Wifi Development Board
Reviews
There are no reviews yet