Subtotal: ₹120.00
-27%
Audio ICs Compare
TDA2040 25-watt hi-fi audio power amplifier-1Pc
Features
■ Wide-range supply voltage, up to 40 V
■ Single or split power supply
■ Short-circuit protection to ground
■ Thermal shutdown
■ PO = 25 W @ THD = 0.5%, VS = ±17 V, RL= 4 Ω
■ PO = 30 W @ THD =10%, VS = ±17 V, RL = 4 Ω
Availability:
2 in stock
₹109.00 ₹149.00
2 in stock
Description
The TDA2040 is a monolithic integrated circuit in
the Pentawatt® package, intended for use as an
audio class-AB amplifier. Typically, it provides
25 W output power into 4 Ω with THD = 0.5% at
VS = 34 V. The TDA2040 provides high output
current and has very low harmonic and crossover
distortion. Furthermore, the device incorporates a
patented short-circuit protection system
Add a review
You must be logged in to post a review Log In
Related products
- Accessories, Sensors
MPU6050 – Triple Axis Gyro Accelerometer Module
Features:-
- Uses the popular MPU6050 IC
- MPU6050 contains a 3 axis Accelerometer and Gyroscope in a single package and simplifies design and usage. It also reduces cross axis alignment issues unlike other sensors with separate accelerometer and gyroscope ICs
- Digital I2C interface to read the output of the sensor
- Input Voltage: 2.3 – 3.4V
- Selectable Solder Jumpers on CLK, FSYNC and AD0
- Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
- Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
- Embedded algorithms for run-time bias and compass calibration. No user intervention required
- Digital-output temperature sensor
SKU: MPU6050 - Triple Axis Gyro Accelerometer Module - Accessories, Modules, Shields, Accessories, Motor Driver
L293D IC BASED MOTOR DRIVER MODULE compatible with Arduino
-30%
Accessories, Modules, Shields, Accessories, Motor DriverL293D IC BASED MOTOR DRIVER MODULE compatible with Arduino
- CAN CONTROL DC GEARED MOTOR
- CAN BE EASILY INTERFACED WITH MICRO-CONTROLLER USING HEADER PINS
- COMPATIBLE WITH ARDUINO, RASPBERRY PI, ARM, AVR, PIC, 8051, etc – Can provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V.
- With Terminal Blocks for connecting motors & power supply and Berg Sticks for control signals from microcontroller
- Can control 2 DC Motors, their direction using control lines and their speed using PWM.
SKU: L293D IC BASED MOTOR DRIVER MODULE compatible with Arduino - PROGRAMMABLE BOARDS, Arduino, Boards
Arduino NANO V3.0 Development Board – Clone Compatible Model
-20%
PROGRAMMABLE BOARDS, Arduino, BoardsArduino NANO V3.0 Development Board – Clone Compatible Model
Specifications:-
- Microcontroller Atmel ATmega328 SMD Package
- Operating Voltage (logic level) 5 V
- Input Voltage (recommended) 7-12 V
- Input Voltage (limits) 6-20 V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins 8
- DC Current per I/O Pin 40 mA
- Flash Memory 32 KB (of which 2KB used by bootloader)
- SRAM 2 KB
- EEPROM 1 KB
- Clock Speed 16 MHz
- Dimensions 0.70” x 1.70
SKU: Arduino NANO V3.0 Development Board - Clone Compatible Model - USB CABLE & PC peripherals, Accessories, Accessories
USB 2.0 A to Mini 5 pin B Cable for External HDDS/Camera/Card Readers/For Arduino nano
-54%
USB CABLE & PC peripherals, Accessories, AccessoriesUSB 2.0 A to Mini 5 pin B Cable for External HDDS/Camera/Card Readers/For Arduino nano
- Make plug-and-play connections with mobile phones, MP3 players, digital cameras and PDAs, External Hard Drives
- Ideal for transferring your pictures from your digital camera to your PC
- Connect a peripheral with a 5-Pin Mini-USB port to an USB Hub or USB port on PC
- Cable Length : 27 cm ,Compatible with USB 1.0, 1.1 and 2.0.
- Sync/charge Mini-USB enabled devices, from your laptop, computer & more
SKU: USB 2.0 A to Mini 5 pin B Cable for External HDDS/Camera/Card Readers/For Arduino nano - PROGRAMMABLE BOARDS, Arduino, Boards
Arduino UNO R3 SMD Atmega328P Board – Clone Compatible Model
-11%
PROGRAMMABLE BOARDS, Arduino, BoardsArduino UNO R3 SMD Atmega328P Board – Clone Compatible Model
Specifications:-
Microcontroller : ATmega328 SMD.
Operating Voltage : 5V.
Supply Voltage recommended : 7-12V DC.
Digital I/O Pins : 14 (of which 6 provide PWM output).
Analog Input Pins : 6.
DC Current per I/O Pin : 40 mA.
DC Current for 3.3V Pin : 50 mA.
Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader.
SRAM : 2 KB (ATmega328).
EEPROM : 1 KB (ATmega328).
Clock Speed : 16 MHz.
SKU: Arduino UNO R3 SMD Atmega328P Board - Clone Compatible Model
Reviews
There are no reviews yet